وينج سبان للتكنولوجيا
High Pressure Cleaning Pump Ready to Ship
This high pressure cleaning pump has a rated pressure of 50 to 2800 bar and an ultra-large flow rate of up to 1000 liters per minute. Winspan belongs to the source manufacturer, without any middlemen to earn the difference, fully support mass procurement, to provide you with a very competitive ex-factory price and a faster delivery cycle.
مضخة التنظيف بالضغط العالي للأشخاص
High-pressure cleaning machine manufacturers
these buyers need to deliver complete sets of high-pressure cleaning units to customers. winspan provide it with a variety of parameters of the pump body core components, with left and right symmetrical biaxial design, it is convenient for them to be integrated in the self-designed gasoline, diesel or motor drive base.
Industrial pipeline and municipal sanitation engineering companies
they need to perform long-distance sewer dredging and urban pipeline cleaning tasks. The large flow and high pressure cleaning pump can continuously output a pressure of more than 500 bar and effectively crush the grease and stones accumulated on the inner wall of the pipeline.
Ship Rust Removal and Offshore Contractors
These customers perform hull paint removal and marine structure cleaning in the dock. The stainless steel high-pressure plunger pump with salt spray and corrosion resistance can directly pump fresh water or treated media to meet the requirements of 24-hour uninterrupted high-load continuous operation.
Importers, exporters and distributors of industrial cleaning equipment
Traders who are committed to distributing high-quality high-pressure cleaning pumps and accessories in the local market. Products have CE and EAC international certification, provide factory direct selling prices and customized packaging services to help distributors quickly develop the local industrial market.
خصائص مضخة التنظيف بالضغط العالي الضغط
99.5% purity ceramic plunger to reduce wear
the use of high-purity alumina ceramic plunger, surface roughness is less than 0.2 microns, with imported V-type water seal, so that the pump body friction heat reduced by 45%, water seal life extension of 2 years.
Forged brass and stainless steel pump head anti-corrosion
the pump head is made of forged brass or 316L stainless steel with tensile strength greater than 400 MPa, which has strong anti-cavitation performance, and the life of the pump body is extended to more than 3000 hours in acid and alkali or salt spray environment.
Integral forged crankshaft bears heavy load
the crankshaft is precision forged and heat treated with high-strength alloy steel, which improves the bending resistance by 50% compared with ordinary cast crankshaft, ensuring that the equipment does not break under continuous high-pressure operation.
The precision oil circuit design reduces the temperature rise by 15 degrees
a unique forced lubricating oil channel is designed inside the pump body, and the operating temperature rise is controlled within 15 degrees Celsius, which effectively prevents the gearbox from overheating and ensures the continuous operation requirements of industrial grade.
The two-way symmetrical structure is convenient for flexible installation
the pump body adopts symmetrical design, and the transmission shaft can be installed on the left or right side, which provides a wider internal assembly space for equipment integrators and reduces 30% of the equipment internal pipeline routing workload.
Low vibration and low noise operation design
through precision dynamic balance test, the vibration amplitude of the whole pump is controlled within 10 microns, and the noise level is less than 80 decibels, which reduces the loosening probability of parts caused by system pipeline vibration.
High pressure cleaning pump technical parameters table
| نموذج المنتج | ضغط العمل المقدر | Maximum rated flow | Matching motor power | Crankshaft input speed | Pump head body material | Inlet/outlet connection thread size |
| WP-1509 | 150 bar | 9 liters per minute | 3 kilowatts | 1450 دورة في الدقيقة | Forged brass | Water inlet: 1/2 inch; Water outlet: 3/8 inch |
| WP-2815 | 280 bar | 15 لتراً في الدقيقة | 7.5 kilowatts | 1450 دورة في الدقيقة | Forged brass | Water inlet: 1/2 inch; Water outlet: 3/8 inch |
| WP-5030 | 500 بار | 30 liters per minute | 30 kilowatts | 1450 دورة في الدقيقة | فولاذ 316L المقاوم للصدأ | Water inlet three-quarters of an inch, water outlet one-half an inch. |
| WP-10045 | 1000 bar | 45 liters per minute | 90 kilowatts | 1000 revolutions per minute | فولاذ 316L المقاوم للصدأ | Water inlet 1 inch, water outlet 1/2 inch |
| WP-28003 | 2800 بار | 3 liters per minute | 110 kilowatts | 600 revolutions per minute | Nickel-based alloy stainless steel | One-inch inlet and specially designed high-pressure connector for water outlet |
high pressure cleaning pump contrast point
The traditional industrial-grade high-pressure cleaning pump is easy to burn out due to high temperature rise under ultra-high pressure continuous operation. However, the winspan high pressure cleaning pump is designed through internal forced cooling and balanced lubrication circuit. Under the working environment of high pressure airtight or continuous high load, the temperature rise of its bearing box and sealing cavity is significantly reduced by 15 degrees Celsius. Even if it is in a continuous 24-hour operation state, it can effectively avoid downtime and maintenance caused by overheating. In addition, many similar products on the market are highly susceptible to cavitation cracking when dealing with corrosive chemical reagents or salt spray seawater environment. The winspan-made high pressure cleaning pump is made of integrally forged stainless steel and corrosion-resistant valve body components. The pump cavity flow passage is specially hardened surface treatment, so that its corrosion-resistant life in acid and alkali or marine high salinity cleaning work is 1.8 times higher than that of conventional copper pumps.
Frequent wear of water seals leads to frequent shutdowns
The friction and heat generation of traditional high-pressure pumps cause frequent damage to seals. The winspan adopts mirror ceramic plunger and self-lubricating design, which makes the seal life break through 1800 hours.
Equipment integration assembly pipeline is messy and cumbersome
the internal assembly of the unit is often limited to a single drive shaft direction. The product adopts a symmetrical two-axis structure, which can be connected to the left or right side at will, reducing the internal pipeline arrangement space by 30%.
Outdoor no electricity scene equipment shutdown difficult to use
the project site lack of power grid. The winspan provides an integrated diesel engine and gasoline engine direct drive unit, which can be operated directly without power connection to meet the needs of high-intensity field engineering.
High-Pressure Cleaning Pump Operating Instructions
Check the oil level before starting
confirm that the lubricating oil in the crankcase of the pump body reaches the center line of the oil window before running, and replace it with new oil after 50 hours of first use, and then replace it regularly every 400 hours.
Water source filtration and water inlet pressure guarantee
the pump inlet must be equipped with a filter with a filtration accuracy of not less than 50 microns, and ensure that the water supply flow is greater than 1.5 times the rated flow of the pump. It is strictly prohibited to cause seal wear due to dry rotation without water.
Excess pipeline air emptying operation
open the spray gun before the first start, make the water flow run for 1 minute under pressure-free state, and gradually increase the pressure valve to the rated pressure after the air in the pump body and pipeline is completely exhausted.
Stop the machine to clean up the anti-freezing and anti-corrosion treatment
in the cold areas in the north or before long-term shutdown, it is necessary to completely drain the residual water in the pump body and inject a small amount of antifreeze to prevent the pump body and internal valves from freezing at low temperature.
الأسئلة الشائعة
اتصل بنا
High Pressure Cleaning Pump Ready to Ship
This high pressure cleaning pump has a rated pressure of 50 to 2800 bar and an ultra-large flow rate of up to 1000 liters per minute. Winspan belongs to the source manufacturer, without any middlemen to earn the difference, fully support mass procurement, to provide you with a very competitive ex-factory price and a faster delivery cycle.
50 إلى 2800 بار
ضغط العمل
3 إلى 1000 لتر في الدقيقة
التدفق المقدر
1.5 to 315 kW
قوة المحرك
خصائص مضخة التنظيف بالضغط العالي الضغط
99.5% purity ceramic plunger to reduce wear
the use of high-purity alumina ceramic plunger, surface roughness is less than 0.2 microns, with imported V-type water seal, so that the pump body friction heat reduced by 45%, water seal life extension of 2 years.
Forged brass and stainless steel pump head anti-corrosion
the pump head is made of forged brass or 316L stainless steel with tensile strength greater than 400 MPa, which has strong anti-cavitation performance, and the life of the pump body is extended to more than 3000 hours in acid and alkali or salt spray environment.
Integral forged crankshaft bears heavy load
the crankshaft is precision forged and heat treated with high-strength alloy steel, which improves the bending resistance by 50% compared with ordinary cast crankshaft, ensuring that the equipment does not break under continuous high-pressure operation.
The precision oil circuit design reduces the temperature rise by 15 degrees
a unique forced lubricating oil channel is designed inside the pump body, and the operating temperature rise is controlled within 15 degrees Celsius, which effectively prevents the gearbox from overheating and ensures the continuous operation requirements of industrial grade.
The two-way symmetrical structure is convenient for flexible installation
the pump body adopts symmetrical design, and the transmission shaft can be installed on the left or right side, which provides a wider internal assembly space for equipment integrators and reduces 30% of the equipment internal pipeline routing workload.
Low vibration and low noise operation design
through precision dynamic balance test, the vibration amplitude of the whole pump is controlled within 10 microns, and the noise level is less than 80 decibels, which reduces the loosening probability of parts caused by system pipeline vibration.
High pressure cleaning pump technical parameters table
| نموذج المنتج | ضغط العمل المقدر | Maximum rated flow | Matching motor power | Crankshaft input speed | Pump head body material | Inlet/outlet connection thread size |
| WP-1509 | 150 bar | 9 liters per minute | 3 kilowatts | 1450 دورة في الدقيقة | Forged brass | Water inlet: 1/2 inch; Water outlet: 3/8 inch |
| WP-2815 | 280 bar | 15 لتراً في الدقيقة | 7.5 kilowatts | 1450 دورة في الدقيقة | Forged brass | Water inlet: 1/2 inch; Water outlet: 3/8 inch |
| WP-5030 | 500 بار | 30 liters per minute | 30 kilowatts | 1450 دورة في الدقيقة | فولاذ 316L المقاوم للصدأ | Water inlet three-quarters of an inch, water outlet one-half an inch. |
| WP-10045 | 1000 bar | 45 liters per minute | 90 kilowatts | 1000 revolutions per minute | فولاذ 316L المقاوم للصدأ | Water inlet 1 inch, water outlet 1/2 inch |
| WP-28003 | 2800 بار | 3 liters per minute | 110 kilowatts | 600 revolutions per minute | Nickel-based alloy stainless steel | One-inch inlet and specially designed high-pressure connector for water outlet |
high pressure cleaning pump contrast point
Frequent wear of water seals leads to frequent shutdowns
The friction and heat generation of traditional high-pressure pumps cause frequent damage to seals. The winspan adopts mirror ceramic plunger and self-lubricating design, which makes the seal life break through 1800 hours.
Equipment integration assembly pipeline is messy and cumbersome
the internal assembly of the unit is often limited to a single drive shaft direction. The product adopts a symmetrical two-axis structure, which can be connected to the left or right side at will, reducing the internal pipeline arrangement space by 30%.
Outdoor no electricity scene equipment shutdown difficult to use
the project site lack of power grid. The winspan provides an integrated diesel engine and gasoline engine direct drive unit, which can be operated directly without power connection to meet the needs of high-intensity field engineering.
مضخة التنظيف بالضغط العالي للأشخاص
High-pressure cleaning machine manufacturers
these buyers need to deliver complete sets of high-pressure cleaning units to customers. winspan provide it with a variety of parameters of the pump body core components, with left and right symmetrical biaxial design, it is convenient for them to be integrated in the self-designed gasoline, diesel or motor drive base.
Industrial pipeline and municipal sanitation engineering companies
they need to perform long-distance sewer dredging and urban pipeline cleaning tasks. The large flow and high pressure cleaning pump can continuously output a pressure of more than 500 bar and effectively crush the grease and stones accumulated on the inner wall of the pipeline.
Ship Rust Removal and Offshore Contractors
These customers perform hull paint removal and marine structure cleaning in the dock. The stainless steel high-pressure plunger pump with salt spray and corrosion resistance can directly pump fresh water or treated media to meet the requirements of 24-hour uninterrupted high-load continuous operation.
Importers, exporters and distributors of industrial cleaning equipment
Traders who are committed to distributing high-quality high-pressure cleaning pumps and accessories in the local market. Products have CE and EAC international certification, provide factory direct selling prices and customized packaging services to help distributors quickly develop the local industrial market.
High-Pressure Cleaning Pump Operating Instructions
Check the oil level before starting
confirm that the lubricating oil in the crankcase of the pump body reaches the center line of the oil window before running, and replace it with new oil after 50 hours of first use, and then replace it regularly every 400 hours.
Water source filtration and water inlet pressure guarantee
the pump inlet must be equipped with a filter with a filtration accuracy of not less than 50 microns, and ensure that the water supply flow is greater than 1.5 times the rated flow of the pump. It is strictly prohibited to cause seal wear due to dry rotation without water.
Excess pipeline air emptying operation
open the spray gun before the first start, make the water flow run for 1 minute under pressure-free state, and gradually increase the pressure valve to the rated pressure after the air in the pump body and pipeline is completely exhausted.
Stop the machine to clean up the anti-freezing and anti-corrosion treatment
in the cold areas in the north or before long-term shutdown, it is necessary to completely drain the residual water in the pump body and inject a small amount of antifreeze to prevent the pump body and internal valves from freezing at low temperature.