Search the whole station
This high pressure cleaning pump has a rated pressure of 50 to 2800 bar and an ultra-large flow rate of up to 1000 liters per minute. Winspan belongs to the source manufacturer, without any middlemen to earn the difference, fully support mass procurement, to provide you with a very competitive ex-factory price and a faster delivery cycle.
these buyers need to deliver complete sets of high-pressure cleaning units to customers. winspan provide it with a variety of parameters of the pump body core components, with left and right symmetrical biaxial design, it is convenient for them to be integrated in the self-designed gasoline, diesel or motor drive base.
they need to perform long-distance sewer dredging and urban pipeline cleaning tasks. The large flow and high pressure cleaning pump can continuously output a pressure of more than 500 bar and effectively crush the grease and stones accumulated on the inner wall of the pipeline.
These customers perform hull paint removal and marine structure cleaning in the dock. The stainless steel high-pressure plunger pump with salt spray and corrosion resistance can directly pump fresh water or treated media to meet the requirements of 24-hour uninterrupted high-load continuous operation.
Traders who are committed to distributing high-quality high-pressure cleaning pumps and accessories in the local market. Products have CE and EAC international certification, provide factory direct selling prices and customized packaging services to help distributors quickly develop the local industrial market.
the use of high-purity alumina ceramic plunger, surface roughness is less than 0.2 microns, with imported V-type water seal, so that the pump body friction heat reduced by 45%, water seal life extension of 2 years.
the pump head is made of forged brass or 316L stainless steel with tensile strength greater than 400 MPa, which has strong anti-cavitation performance, and the life of the pump body is extended to more than 3000 hours in acid and alkali or salt spray environment.
the crankshaft is precision forged and heat treated with high-strength alloy steel, which improves the bending resistance by 50% compared with ordinary cast crankshaft, ensuring that the equipment does not break under continuous high-pressure operation.
a unique forced lubricating oil channel is designed inside the pump body, and the operating temperature rise is controlled within 15 degrees Celsius, which effectively prevents the gearbox from overheating and ensures the continuous operation requirements of industrial grade.
the pump body adopts symmetrical design, and the transmission shaft can be installed on the left or right side, which provides a wider internal assembly space for equipment integrators and reduces 30% of the equipment internal pipeline routing workload.
through precision dynamic balance test, the vibration amplitude of the whole pump is controlled within 10 microns, and the noise level is less than 80 decibels, which reduces the loosening probability of parts caused by system pipeline vibration.
| Product Model | Rated working pressure | Maximum rated flow | Matching motor power | Crankshaft input speed | Pump head body material | Inlet/outlet connection thread size |
| WP-1509 | 150 bar | 9 liters per minute | 3 kilowatts | 1450 revolutions per minute | Forged brass | Water inlet: 1/2 inch; Water outlet: 3/8 inch |
| WP-2815 | 280 bar | 15 liters per minute | 7.5 kilowatts | 1450 revolutions per minute | Forged brass | Water inlet: 1/2 inch; Water outlet: 3/8 inch |
| WP-5030 | 500 bar | 30 liters per minute | 30 kilowatts | 1450 revolutions per minute | 316L stainless steel | Water inlet three-quarters of an inch, water outlet one-half an inch. |
| WP-10045 | 1000 bar | 45 liters per minute | 90 kilowatts | 1000 revolutions per minute | 316L stainless steel | Water inlet 1 inch, water outlet 1/2 inch |
| WP-28003 | 2800 bar | 3 liters per minute | 110 kilowatts | 600 revolutions per minute | Nickel-based alloy stainless steel | One-inch inlet and specially designed high-pressure connector for water outlet |
The traditional industrial-grade high-pressure cleaning pump is easy to burn out due to high temperature rise under ultra-high pressure continuous operation. However, the winspan high pressure cleaning pump is designed through internal forced cooling and balanced lubrication circuit. Under the working environment of high pressure airtight or continuous high load, the temperature rise of its bearing box and sealing cavity is significantly reduced by 15 degrees Celsius. Even if it is in a continuous 24-hour operation state, it can effectively avoid downtime and maintenance caused by overheating. In addition, many similar products on the market are highly susceptible to cavitation cracking when dealing with corrosive chemical reagents or salt spray seawater environment. The winspan-made high pressure cleaning pump is made of integrally forged stainless steel and corrosion-resistant valve body components. The pump cavity flow passage is specially hardened surface treatment, so that its corrosion-resistant life in acid and alkali or marine high salinity cleaning work is 1.8 times higher than that of conventional copper pumps.
The friction and heat generation of traditional high-pressure pumps cause frequent damage to seals. The winspan adopts mirror ceramic plunger and self-lubricating design, which makes the seal life break through 1800 hours.
the internal assembly of the unit is often limited to a single drive shaft direction. The product adopts a symmetrical two-axis structure, which can be connected to the left or right side at will, reducing the internal pipeline arrangement space by 30%.
the project site lack of power grid. The winspan provides an integrated diesel engine and gasoline engine direct drive unit, which can be operated directly without power connection to meet the needs of high-intensity field engineering.
confirm that the lubricating oil in the crankcase of the pump body reaches the center line of the oil window before running, and replace it with new oil after 50 hours of first use, and then replace it regularly every 400 hours.
the pump inlet must be equipped with a filter with a filtration accuracy of not less than 50 microns, and ensure that the water supply flow is greater than 1.5 times the rated flow of the pump. It is strictly prohibited to cause seal wear due to dry rotation without water.
open the spray gun before the first start, make the water flow run for 1 minute under pressure-free state, and gradually increase the pressure valve to the rated pressure after the air in the pump body and pipeline is completely exhausted.
in the cold areas in the north or before long-term shutdown, it is necessary to completely drain the residual water in the pump body and inject a small amount of antifreeze to prevent the pump body and internal valves from freezing at low temperature.
This high pressure cleaning pump has a rated pressure of 50 to 2800 bar and an ultra-large flow rate of up to 1000 liters per minute. Winspan belongs to the source manufacturer, without any middlemen to earn the difference, fully support mass procurement, to provide you with a very competitive ex-factory price and a faster delivery cycle.
50 to 2800 bar
Working pressure
3 to 1000 liters per minute
Rated flow
1.5 to 315 kW
Motor power
the use of high-purity alumina ceramic plunger, surface roughness is less than 0.2 microns, with imported V-type water seal, so that the pump body friction heat reduced by 45%, water seal life extension of 2 years.
the pump head is made of forged brass or 316L stainless steel with tensile strength greater than 400 MPa, which has strong anti-cavitation performance, and the life of the pump body is extended to more than 3000 hours in acid and alkali or salt spray environment.
the crankshaft is precision forged and heat treated with high-strength alloy steel, which improves the bending resistance by 50% compared with ordinary cast crankshaft, ensuring that the equipment does not break under continuous high-pressure operation.
a unique forced lubricating oil channel is designed inside the pump body, and the operating temperature rise is controlled within 15 degrees Celsius, which effectively prevents the gearbox from overheating and ensures the continuous operation requirements of industrial grade.
the pump body adopts symmetrical design, and the transmission shaft can be installed on the left or right side, which provides a wider internal assembly space for equipment integrators and reduces 30% of the equipment internal pipeline routing workload.
through precision dynamic balance test, the vibration amplitude of the whole pump is controlled within 10 microns, and the noise level is less than 80 decibels, which reduces the loosening probability of parts caused by system pipeline vibration.
| Product Model | Rated working pressure | Maximum rated flow | Matching motor power | Crankshaft input speed | Pump head body material | Inlet/outlet connection thread size |
| WP-1509 | 150 bar | 9 liters per minute | 3 kilowatts | 1450 revolutions per minute | Forged brass | Water inlet: 1/2 inch; Water outlet: 3/8 inch |
| WP-2815 | 280 bar | 15 liters per minute | 7.5 kilowatts | 1450 revolutions per minute | Forged brass | Water inlet: 1/2 inch; Water outlet: 3/8 inch |
| WP-5030 | 500 bar | 30 liters per minute | 30 kilowatts | 1450 revolutions per minute | 316L stainless steel | Water inlet three-quarters of an inch, water outlet one-half an inch. |
| WP-10045 | 1000 bar | 45 liters per minute | 90 kilowatts | 1000 revolutions per minute | 316L stainless steel | Water inlet 1 inch, water outlet 1/2 inch |
| WP-28003 | 2800 bar | 3 liters per minute | 110 kilowatts | 600 revolutions per minute | Nickel-based alloy stainless steel | One-inch inlet and specially designed high-pressure connector for water outlet |
The friction and heat generation of traditional high-pressure pumps cause frequent damage to seals. The winspan adopts mirror ceramic plunger and self-lubricating design, which makes the seal life break through 1800 hours.
the internal assembly of the unit is often limited to a single drive shaft direction. The product adopts a symmetrical two-axis structure, which can be connected to the left or right side at will, reducing the internal pipeline arrangement space by 30%.
the project site lack of power grid. The winspan provides an integrated diesel engine and gasoline engine direct drive unit, which can be operated directly without power connection to meet the needs of high-intensity field engineering.
these buyers need to deliver complete sets of high-pressure cleaning units to customers. winspan provide it with a variety of parameters of the pump body core components, with left and right symmetrical biaxial design, it is convenient for them to be integrated in the self-designed gasoline, diesel or motor drive base.
they need to perform long-distance sewer dredging and urban pipeline cleaning tasks. The large flow and high pressure cleaning pump can continuously output a pressure of more than 500 bar and effectively crush the grease and stones accumulated on the inner wall of the pipeline.
These customers perform hull paint removal and marine structure cleaning in the dock. The stainless steel high-pressure plunger pump with salt spray and corrosion resistance can directly pump fresh water or treated media to meet the requirements of 24-hour uninterrupted high-load continuous operation.
Traders who are committed to distributing high-quality high-pressure cleaning pumps and accessories in the local market. Products have CE and EAC international certification, provide factory direct selling prices and customized packaging services to help distributors quickly develop the local industrial market.
confirm that the lubricating oil in the crankcase of the pump body reaches the center line of the oil window before running, and replace it with new oil after 50 hours of first use, and then replace it regularly every 400 hours.
the pump inlet must be equipped with a filter with a filtration accuracy of not less than 50 microns, and ensure that the water supply flow is greater than 1.5 times the rated flow of the pump. It is strictly prohibited to cause seal wear due to dry rotation without water.
open the spray gun before the first start, make the water flow run for 1 minute under pressure-free state, and gradually increase the pressure valve to the rated pressure after the air in the pump body and pipeline is completely exhausted.
in the cold areas in the north or before long-term shutdown, it is necessary to completely drain the residual water in the pump body and inject a small amount of antifreeze to prevent the pump body and internal valves from freezing at low temperature.
Wingspan Tech
