Wingspan Tech
Water Blaster Pressure Washer
Model: WHALE 1500N
The WHALE 1500N water blaster pressure washer delivers 1,500 bar at up to 18.5 L/min from a 45 kW electric drive, with a 15 m outlet hose and four nozzle tips for commercial buyers comparing complete machine packages. For marine maintenance, its ultra-high-pressure jet removes coatings and hard deposits while controlled nozzle selection, water supply and exclusion zones determine surface result and operator risk. Conventional lower-pressure washers suit rinsing tasks that need more coverage and less cutting force.
- Максимальное давление1,500 bar / 21,750 psi
- Максимальный расход18.5 L/min / 4.9 GPM
- Electric drive45 kW, 440 V, 60 Hz
- Outlet hose15 m
- MOQ1 set
- ConfigurationMade to order
WHALE 1500N Package Sets Pressure, Flow And Site Requirements
The WHALE 1500N package combines the pump, electric drive, hose, gun and nozzle set needed to evaluate installation and operating scope.
| Package Element | Included Configuration | Site Requirement |
|---|---|---|
| Pressure system | WTF pump head, regulating valve and filter system | Clean filtered feed water with adequate supply capacity |
| Electric drive | 45 kW motor with 1.72:1 timing-belt drive | 440 V, 60 Hz industrial power and matching protection |
| Working equipment | 15 m outlet hose, bypass spray gun and four nozzle tips | Every downstream component must be rated for 1,500 bar |
A 440 V, 60 Hz supply, filtered feed water and rated 1,500 bar accessories are prerequisites for this configuration.
1,500 Bar Jetting Targets Marine Coatings And Hard Deposits
At 1,500 bar, the jet is intended for coating removal and hard-deposit cleaning on robust marine and industrial surfaces rather than routine rinsing.
Suitable Removal Work
Ship decks, hull areas and steel structures can be prepared by removing aged coatings, corrosion products and tightly bonded deposits.
Jet Result Controls
Nozzle type, standoff distance and traverse speed determine removal intensity, strip width and substrate exposure.
Operating Boundary
Rated hoses and fittings, trained operators, drainage and a controlled exclusion zone are required for ultra-high-pressure work.
Nozzle type, standoff distance, traverse speed, drainage and an exclusion zone control the removal result and the operating risk.
Ultra-High-Pressure Blasting And Conventional Washing Serve Different Jobs
Water blaster pressure washer results span equipment from routine cleaning units to ultra-high-pressure systems for bonded-material removal.
Ultra-High-Pressure Surface Preparation
The 1,500 bar WHALE 1500N concentrates jet energy for controlled removal of coatings and hard deposits from robust surfaces.
Conventional Pressure Washing
Lower-pressure equipment with broader coverage suits vehicles, siding, floors and other rinsing work where reduced cutting force matters.
The 1,500 bar WHALE 1500N fits controlled surface preparation, while lower-pressure machines fit general washing where coverage and reduced cutting force matter more.
Water Blaster Pressure Washer Specifications
Model, output, drive, dimensions and supplied working equipment are listed on one basis for order comparison.
| Product name | Water Blaster Pressure Washer |
|---|---|
| Модель | WHALE 1500N |
| Product category | Electric ultra-high-pressure water blasting machine |
| Machine size and weight | 1550 × 800 × 1220 mm; net weight 720 kg |
| Dimensional tolerance | Overall dimensions are nominal; production tolerance ±10 mm |
| Structural and fluid-path materials | Painted steel skid with stainless-steel high-pressure fluid components |
| Water and pressure connections | Filtered water inlet; high-pressure outlet for the supplied 15 m hose and bypass spray gun |
| Compliance basis | ISO 9001-managed production; EAC, CCC and EC documentation for applicable configurations |
| Nameplate traceability | Model, serial number, electrical rating and maximum pressure |
| Packaging unit | One machine per reinforced export plywood crate |
Water Blaster Pressure Washer Output And Working Conditions
The output values use the model-specific key-attributes table; the 18.5 L/min value governs where the reference-page introduction differs.
Water Blaster Pressure Washer MOQ, Production And Delivery
Order terms cover one complete machine and can be quoted against the required voltage, hose length, nozzle set and delivery basis.
- MOQ1 complete set
- Sample routeOne paid pilot unit
- Pilot lead time20–25 working days
- Bulk lead time30–45 working days after technical approval and deposit
- Price basisEXW or FOB, based on configuration
- PackagingReinforced export plywood crate with moisture protection
- Payment30% T/T deposit; 70% before shipment
- ShippingSea-freight documentation and buyer-nominated forwarder support
Water Blaster Pressure Washer Manufacturing And Order Support
Manufacturer identity and production capacity are tied to the supplied company and its published product page.
Taizhou Zhuosen Machinery Co., Ltd.
The manufacturer operates from Xialiang Industry Park, Luqiao, Taizhou, Zhejiang, China. Its published capacity covers 500,000 plunger pumps and 50,000 high-pressure washing machines per year.
- Pressure-system assembly and inspection
- Standard and configured electric water blasting equipment
- Export packing and order documentation
- Replacement nozzles, seals and pressure-path service parts
Water Blaster Pressure Washer Compliance Documents
Management-system and market-compliance documents are supplied for the applicable ordered configuration.
- ISO 9001 quality management systemManagement-system document
- EAC complianceApplicable market configuration
- CCC complianceApplicable electrical configuration
- EC documentationApplicable export configuration
Request A Water Blaster Pressure Washer Quote
- Phone: +86 13968669135
- Email: [email protected]
- WhatsApp: +86 13968669135
- Address: Xialiang Industry Park, Luqiao, Taizhou, Zhejiang, China
