industrial pressure washer dealers

Marine Cleaning Equipment for Your Product Range

These two wheeled units serve marine cleaning applications such as hull and deck maintenance, where water jets act on adhered contamination. Stainless-steel pump heads and ceramic plungers form the pumping assemblies; electric motors supply the drive without an engine’s exhaust at the work area.

The cleaning objective determines the setup. Removing marine growth while preserving an existing coating requires control of jet impact and distance. Removing a coating or rust introduces different surface preparation requirements, including the required finish and collection of removed material. Choose the pressure and nozzle around that result before specifying a machine for a customer.

Choose Pressure for Adhesion and Flow for Rinsing

The ESF-20150 provides the higher listed pressure; the EHF2080 offers a smaller, lighter machine with a lower motor power requirement. Both have a listed flow of 20 L/min, approximately 5.3 US GPM. The higher-pressure model therefore adds pressure rather than additional rinse-water volume.

Higher pressure can help break stronger adhesion when the substrate can tolerate the jet. Flow carries loosened material away, while nozzle size, spray pattern, distance, and hose losses affect the action at the surface. For a task already achievable at the lower pressure, the smaller unit can reduce handling and electrical demands. A more resistant deposit calls for an application assessment before moving to the higher-pressure unit.

Use a representative surface trial to establish cleaning results and acceptable surface change. These pressure levels require trained water jetting operators, a controlled work area, and protective equipment selected for the task.

Compare the Two Cleaning Units

Морской очиститель UHP 22000Psi

An electric unit for applications requiring the higher of these two pressure levels. Its larger motor and heavier chassis suit a site that can accommodate the added power and handling requirements.

• МодельESF-20150
• Listed pressure21,750 PSI / 1,500 bar
• ПотокApproximately 5.3 US GPM / 20 L/min
• Мощность двигателя60.3 hp / 45 kW
• Listed electrical options380 / 440 V; 50 / 60 Hz
• Dimensions, L × W × HApproximately 65.0 × 37.4 × 48.0 in / 1,650 × 950 × 1,220 mm
• ВесApproximately 1,587 lb / 720 kg
• CoverНержавеющая сталь
• Pump constructionStainless-steel pump head; ceramic plunger

The 22,000 PSI product name rounds the model's listed 21,750 PSI pressure.

View ESF-20150 DetailsRequest an ESF-20150 Quote

Морская мойка высокого давления 11600Psi

An electric marine cleaning unit with a more compact footprint and lower weight than the ESF-20150. Consider this configuration when the cleaning task can be met at its pressure level and space or handling capacity is limited.

• МодельEHF2080
• Listed pressure11,600 PSI / 800 bar
• ПотокApproximately 5.3 US GPM / 20 L/min
• Мощность двигателя40 hp / 30 kW
• Listed electrical options380 / 440 V; 50 / 60 Hz
• Dimensions, L × W × HApproximately 42.5 × 25.2 × 42.9 in / 1,080 × 640 × 1,090 mm
• ВесApproximately 805 lb / 365 kg
• Cover304 нержавеющая сталь
• Pump constructionStainless-steel pump head; ceramic plunger

View EHF2080 DetailsRequest an EHF2080 Quote

Plan the Power, Water, and Working Area

Electrical supply

Match the quoted motor configuration to the site’s voltage, frequency, phase, available current, and protection. The listed voltage and frequency options need confirmation for the specific build; the site’s electrical supply determines the required connection and any installation work.

Water and hose setup

Provide a water source that sustains the selected unit’s flow and meets its inlet pressure, temperature, and filtration requirements. An undersupplied pump can lose performance and suffer cavitation damage. Select the nozzle for the target pressure and flow, then match the hose, gun, fittings, and accessories to the complete system’s working pressure and temperature.

Movement and runoff

Plan unloading and movement around the machine’s weight, access width, and available handling equipment. The wheels help reposition the unit on suitable ground; lifting and loading require a separate handling plan. Arrange collection of runoff and removed material around the work area, especially when the job removes coatings or contaminated deposits.

Define the Equipment Package and Support Before Ordering

A useful equipment quote identifies the machine configuration and the accessories needed to perform the job. Hose length and nozzle selection change reach and jet performance, while the power connection and water supply affect installation cost. Ask for a package that states the included hose, gun, nozzles, documentation, packing, and delivery arrangements so you can price the complete setup for your customer.

For resale inquiries, describe the intended market, expected quantity, and whether the equipment is for stock or a named project. Request the applicable commercial terms with the quote, including any minimum order, payment schedule, and delivery estimate.

Service planning starts with the exact model and its parts documentation. Request the maintenance schedule and availability of matching seals, valves, nozzles, and hoses, together with the applicable warranty scope and responsibility for labor and freight. These details help you plan customer support and spare-parts costs before placing an order.