Wingspan Tech
Electric Hot Water High Pressure Washer
- Диапазон давления
- 200–500 bar (2,900–7,250 psi) across verified models
- Диапазон расхода
- 15–21 L/min (4.0–5.5 GPM) across verified models
- Heating options
- Fully electric or fuel-fired
- Максимальная температура воды
- Up to 98–100°C (208–212°F), model dependent
This selected range uses electric motor drives, with fully electric or fuel-fired heating options to match indoor restrictions, temperature demand and available site power.
Electric Hot Water High Pressure Washer
Price on request
Request a QuoteThree electric-drive hot-water washer configurations are compared by verified pressure, flow, temperature, heating method, electrical supply, enclosure and duty requirements, while the displayed model differences and direct inquiry path support a properly configured quotation. Fully electric heat suits quiet, exhaust-sensitive indoor work when the site's available electrical capacity is adequate. Surface, duty cycle and upkeep needs are defined before ordering.
Pressure, Flow and Heating Options
Product ListThis selected range uses electric motor drives, with fully electric or fuel-fired heating options to match indoor restrictions, temperature demand and available site power. Selection begins with the heat source, followed by pressure and flow requirements for the soil and cleaning rate.
| Selection point | Fully electric heating | Electric drive with fuel-fired heating |
|---|---|---|
| Operating fit | No combustion at the machine; suited to quiet or exhaust-sensitive work when the electrical supply is adequate. | Higher heat duty can suit outdoor or ventilated industrial work where fuel use and exhaust are permitted. |
| Verified Wingspan range | HWP models: 200–300 bar (2,900–4,350 psi), 15–21 L/min (4.0–5.5 GPM), water to 98°C (208°F). | D-series models: 280–500 bar (4,060–7,250 psi), 15–18 L/min (4.0–4.75 GPM), water to 100°C (212°F). |
| Quote inputs | Required inputs include voltage, frequency and phase, target pressure and flow, temperature, application, duty cycle, water supply, mobility, quantity and destination. | |
When All-Electric Heat Fits the Job
Product ListAll-electric heating avoids fuel combustion at the washer and can reduce noise and point-of-use exhaust. That makes it useful for workshops, food-related areas and other indoor locations where the site electrical capacity, drainage, ventilation and local safety rules allow the work.
Heated water softens grease, oil films and stubborn residues faster than cold water in many applications. It can reduce detergent demand, but the correct chemical, temperature and dwell time still depend on the contaminant and surface.
Available voltage, phase and circuit capacity must be confirmed before selecting an electric heater. A fuel-fired heater may be the better configuration when higher heat duty is required and combustion is acceptable at the site.
Application and Quote Planning
Product ListSoil and surface
The application definition covers grease, oil, livestock residue, vehicle cleaning, food-area washdown, property surfaces, municipal work or marine equipment. Coatings, seals and soft materials may require lower pressure or a test area.
Utilities and output
Required utility data includes voltage, frequency, phase, available circuit capacity, inlet-water conditions, target temperature, pressure and flow, plus indoor or outdoor location and any exhaust restriction.
Duty and mobility
Duty information includes operating hours per day, start-stop pattern, hose reach, mobile or stationary use, quantity and destination. These details affect motor, heater, frame and accessory selection.
Routine upkeep
Routine upkeep covers the inlet filter, hose, gun, fittings, pump and heating system. Flushing and storage conditions depend on local water quality, freezing exposure and the selected model instructions.
Electric-Drive Hot-Water Washer Options
These electric-motor-driven hot-water washers combine pressure, flow and controlled water heating for grease and residue removal. The main selection differences are heating method, pressure range, flow, electrical supply and enclosure construction.
Электрический очиститель высокого давления с горячей водой
Indoor or exhaust-sensitive grease and residue cleaning where site electrical capacity supports the heater.
- Application / fitIndoor or exhaust-sensitive grease and residue cleaning where site electrical capacity supports the heater.
- Pressure / flow200–300 bar (2,900–4,350 psi); 15–21 L/min (4.0–5.5 GPM)
- ConstructionBrass pump head, ceramic plungers and powder-coated iron cover
- Power / heating415 V electric drive; electric heating; water to 98°C (208°F)
Fuel-Fired Hot & Cold Water Pressure Washer
Fleet, farm and industrial cleaning where combustion heating is permitted and higher pressure is required.
- Application / fitFleet, farm and industrial cleaning where combustion heating is permitted and higher pressure is required.
- Pressure / flow280–500 bar (4,060–7,250 psi); 15–18 L/min (4.0–4.75 GPM)
- ConstructionBrass pump head, ceramic plungers and powder-coated iron cover
- Power / heating380 V/50 Hz electric drive; diesel-fired heating; 0–100°C (32–212°F)
Stainless Steel Hot Water High Pressure Cleaner
Industrial washdown and demanding cleaning locations where enclosure durability is a selection factor.
- Application / fitIndustrial washdown and demanding cleaning locations where enclosure durability is a selection factor.
- Pressure / flowModel-specific pressure, flow and temperature confirmed in the quotation
- ConstructionStainless steel enclosure; pump and wetted materials confirmed by model
- Power / heatingElectric motor drive; heating method, voltage and phase confirmed by model
Quotation, Configuration and Delivery
Commercial terms are confirmed for the selected model and destination after the operating requirements are reviewed.
Pricing: quoted by model, electrical configuration, accessories, quantity and destination; no approved public Wingspan list price was supplied.
Order quantity: the minimum order and any complete-machine trial arrangement are confirmed for the selected configuration.
Lead time: confirmed after voltage, pressure, flow, target temperature, duty cycle and quantity are approved.
Inspection: request the required pressure, motor-operation and safety test records in the RFQ before order confirmation.
Packing and delivery: export packing, Incoterm, destination and freight route are stated in the final quotation.
Documents: the product download center provides available files, while the quotation identifies any model-specific certificate, manual or inspection document required for the destination market.
Need a Configured Frame, Enclosure or Connection?
A configured proposal depends on the required pressure and flow, site voltage and phase, target water temperature, daily duty, indoor or outdoor location, water supply, destination and preferred mobility.
A reference file supports projects that require a special frame, enclosure, connection or accessory package.
Questions Before Ordering
Model approval depends on confirmed utilities, surface limits, destination requirements and storage conditions.
What water supply should be prepared for the washer?
A clean inlet supply must continuously exceed the selected machine's rated flow. The final configuration depends on confirmed inlet pressure, filtration, hose diameter, water quality and temperature.
Can the pressure be used on every surface?
No. Pressure, nozzle and working distance must suit the surface, with a small-area test completed first. Coatings, seals, soft materials and damaged masonry can be harmed by excessive pressure or heat.
Which electrical details are required for a quotation?
The quotation requires the site voltage, frequency, phase, available circuit capacity and plug or hard-wire requirement. Electrical protection, grounding and cable sizing must follow the selected model and local rules.
Are certifications the same for every model?
Certification availability can vary by model and destination. The inquiry should identify the required market and standard so Wingspan can confirm the applicable documents before order approval.
How should the washer be stored in freezing conditions?
The pump, hoses and heating circuit require drainage and protection according to the model instructions before freezing exposure. Water left in the system can expand and damage pressure-containing parts.
Request a Configured Hot-Water Washer Quote
A configured quotation requires the site power, target pressure and flow, water temperature, application, duty cycle, quantity and destination.
- Phone: +86 13968669135
- Email: [email protected]
- WhatsApp: +86 13968669135
- Address: Xialiang Industry Park, Luqiao, Taizhou, Zhejiang, China