Wingspan Tech
Accessories Pressure Washer
Six car-wash accessories include four 1 L (33.8 US fl oz) foam cannon listings and two aluminum wash arms, with a detail link and image for every selected product. Foam cannon selection depends on washer pressure, flow and connection, while arm selection depends on wash-bay reach and hose routing. Foam cannons apply detergent and swiveling arms keep the high-pressure hose overhead.
Accessories Pressure Washer
Foam Cannons and Wash Bay Arms
Product ListFour foam cannon listings use a 1 L (33.8 US fl oz) bottle and brass head for pressure-washer car washing. The two HXD004 wash arms use aluminum-alloy construction, with a 3–5 m (9.8–16.4 ft) arm and 3.5–5.5 m (11.5–18.0 ft) high-pressure hose. Each product card opens its detail page.
This selection focuses on detergent application and overhead hose routing in car-wash operations. The broader products catalogue covers other pressure-washer equipment.
Washer Connections and Working Conditions
Product ListA foam cannon needs compatible washer pressure, flow, gun-end coupling and head orifice. The listed foam cannon pages show a 1/4 in quick connector and 100–250 bar (1,450–3,626 psi) pressure range; the specified connector must also match the gun’s actual profile and seal.
An overhead wash arm needs a bay layout that accommodates its 3–5 m (9.8–16.4 ft) reach. The 3.5–5.5 m (11.5–18.0 ft) hose needs enough travel to reach the vehicle without dragging across the floor or pulling against the swivel. Hose, swivel and mounting details depend on the installed system.
What These Car Wash Accessories Do
Product ListA gun-mounted foam cannon mixes a car-wash solution with water and air to coat the vehicle before rinsing. Its bottle holds the solution at the spray end, so the equipment’s flow, head orifice and detergent dilution affect foam output.
A swiveling overhead wash arm carries the high-pressure hose above a wash bay. It helps the operator move around the vehicle while keeping more hose off the floor.
Foam Cannons and Wash Arms for Car Washing
This featured pressure-washer accessories selection covers foam cannons and overhead wash arms for car-wash work. Foam cannons serve detergent application; wash arms support overhead hose movement.
Foam Cannon for Car Washing
A car-wash foam applicator with a brass head.
- Application / fitVehicle pre-wash foaming
- Pressure / reach100–250 bar (1,450–3,626 psi)
- МатериалPE bottle; brass head
- Interface1/4 in quick connector
Foam Cannon for Car Washing
A car-wash foam applicator with a brass head.
- Application / fitVehicle pre-wash foaming
- Pressure / reach100–250 bar (1,450–3,626 psi)
- МатериалPE bottle; brass head
- Interface1/4 in quick connector
Foam Cannon for Car Washing
A car-wash foam applicator with a brass head.
- Application / fitVehicle pre-wash foaming
- Pressure / reach100–250 bar (1,450–3,626 psi)
- МатериалPE bottle; brass head
- Interface1/4 in quick connector
Foam Cannon for Car Washing
A car-wash foam applicator with a brass head.
- Application / fitVehicle pre-wash foaming
- Pressure / reach100–250 bar (1,450–3,626 psi)
- МатериалPE bottle; brass head
- Interface1/4 in quick connector
Двойной моющий рычаг HXD004-3
An overhead swivel arm for high-pressure hose movement.
- Application / fitOverhead wash-bay hose routing
- Pressure / reach3–5 m (9.8–16.4 ft) arm reach
- МатериалAluminum alloy
- InterfaceHose and swivel configuration for installed bay
Двухрукавная автомойка HXD004-11
An overhead swivel arm for high-pressure hose movement.
- Application / fitOverhead wash-bay hose routing
- Pressure / reach3–5 m (9.8–16.4 ft) arm reach
- МатериалAluminum alloy
- InterfaceHose and swivel configuration for installed bay
Ordering and Delivery
Samples, pilot orders and bulk supply follow distinct quotation and production routes.
Samples: 1 unit per style; quoted per unit with shipping charged separately. Allow 5–7 working days for sample dispatch.
Pilot orders: 10–99 units per style; unit quotation by configuration. Allow 15–25 working days after specifications and deposit.
Bulk orders: 100+ units per style; tiered quotation by volume, packaging and destination. Allow 25–35 working days.
Supply mode: made to order for the selected finish and connection; sample dispatch in 5–7 working days.
Export delivery: sea freight or buyer-arranged freight, with EXW or FOB terms quoted by destination.
Documents: commercial invoice, packing list and product inspection record accompany the shipment.
Configure a Foam Head or Wash Arm
Questions About Use and Fit
Answers to common questions about the selected products.
Can I use a foam cannon with a garden hose?
These selected foam cannons are for a pressure-washer gun connection. A garden-hose foam gun is a different accessory.
Why can foam become thin or uneven?
Thin or uneven foam can result from detergent dilution, bottle pickup, filter blockage, head orifice selection or washer flow.
Can the overhead arm hose pass through a tight corner?
Plan the swivel position, arm sweep and hose travel against the bay layout so the hose reaches the vehicle without rubbing a wall or structure.
What should be included in a configured-arm inquiry?
A configured-arm inquiry needs the bay drawing, mounting location, required reach, hose route, washer operating conditions and order quantity.
Are the four foam cannon listings different models?
The four foam cannon listings share the same published name and core specifications. Their product images show the listed appearance for each option.
Request a Car Wash Accessory Quote
- Phone: +86 13968669135
- Email: [email protected]
- WhatsApp: +86 13968669135
- Address: xialiang industry part luqiao, taizhou city zhejiang china