Wingspan Tech
ELECTRIC HIGH-PRESSURE WASHER
3000 PSI Pressure Washer
Model: SUN160
The SUN160 is a 220 V electric high-pressure washer configuration for vehicle and property cleaning. The supplied product record lists 160 bar maximum pressure, 12 L/min flow, a 3.0 kW motor and a standard hose, lance, spray gun, reel, filter and foam bottle set. Confirm the required pressure, flow, water source and electrical conditions before ordering.
- Максимальное давление160 bar
- Скорость потока12 L/min
- Electrical Supply220 V / 50 Hz / 1 PH
- Pump / ChassisCopper / ceramic pump; stainless chassis
- Standard Accessories15 m hose, reel, filter and foam bottle
- Order BasisConfirm configuration and commercial terms
Confirm the target pressure and flow at the same operating point before ordering.
OPERATING POINT CHECK
Verify The Operating Point Before Ordering
The supplied SUN160 record is listed at maximum 160 bar and 12 L/min. Match the pressure target with flow, nozzle, hose, water source and electrical supply before treating a 3000 PSI requirement as equivalent.
Pressure And Flow
Max pressure: 160 bar; flow: 12 L/min. Confirm whether your duty requires 3000 PSI at the same measured operating point.
Power And Supply
220 V / 50 Hz / 1 PH / 3.0 kW; verify circuit capacity and site voltage.
Accessories And Connections
Detachable lance, spray gun, 15 m high-pressure hose, hose reel, filter and foam bottle are listed as standard accessories; confirm the connection and rating for the ordered configuration.
Vehicle Surface Check
Use a suitable nozzle, distance and detergent; start at a low-risk setting and follow the vehicle or surface maker limits.
VEHICLE FIT CHECKLIST
Vehicle-Cleaning Compatibility Checklist
Before ordering, confirm the cleaning job, the site utilities and the complete accessory path so the SUN160 is assessed as a working system rather than by PSI alone.
- Cleaning TaskIdentify vehicle type, soil, daily workload and surface sensitivity before selecting the operating point.
- Site UtilitiesVerify 220 V / 50 Hz / 1 PH power, water source, drainage and hose reach for the planned bay.
- Acceptance CheckRequest the current configuration, accessory list and pressure-flow test basis before approving the order.
- Next StepAsk For A SUN160 Fit Review
PRODUCT PHOTOS
Product Photos From Useful Angles
The supplied image set shows the SUN160 unit from rear, side and angled views so buyers can review the frame, pump, hose reel and controls.
COMPLETE SPECIFICATIONS
Exact Data For Ordering
The retained rows below are limited to current-model identity, material and the publicly stated connection path. Exact thread and connection size remain configuration-dependent. Pressure, flow, power and electrical supply are shown in the operating section.
| Название продукта | SUN-Series High Pressure Washer 220V |
|---|---|
| Model / Part Number | SUN160 |
| Категория продукта | Electric High Pressure Washer |
| Material / Composition | Copper/ceramic pump; stainless chassis |
| Connection Path | G 3/4 inch male inlet; M22 x 1.5 male high-pressure outlet with 14 mm bore; IEC B14 direct-coupled motor flange; 28 mm hollow direct-insertion shaft. |
| Machine Dimensions | Bare pump-motor unit: 720 x 390 x 550 mm; complete cart-mounted unit: 860 x 440 x 860 mm (L x W x H). |
| Dimensional Tolerance | ISO 2768-m, +/-2.0 mm for chassis sheet-metal and welded appearance dimensions; H7/k6 motor/pump fit; coaxiality <=0.02 mm. |
| Applicable Standards | IEC 60335-2-79; 2006/42/EC; 2014/35/EU; GB/T 26114-2010. |
| Marking & Traceability | Aluminium nameplate with SUN160, 220V/50Hz/1PH, 3.0 kW, 160 bar, 12 L/min and IPX5; 16-character serial number and six-digit pump-head batch code. |
| Packaging Unit | 1 set/carton; five-layer double-sided kraft corrugated carton with integral EPS protective mould. |
APPLICATIONS & EQUIPMENT
Where This Model Is Used
Use the application notes to define the job and then confirm the pressure, flow, surface and site conditions for the ordered configuration.
Car Wash Shops
The supplied product record identifies car wash shops and car washing as the use environment. Match pressure, flow, nozzle and surface limits to the vehicle job.
Vehicle Exterior And Interior Cleaning
Use the electric washer configuration for vehicle cleaning tasks with the supplied spray gun, lance and hose set; confirm detergent and surface compatibility before use.
Property And Floor Washing
The reference page also presents property and floor cleaning applications. Confirm the surface condition, spray distance and drainage arrangement before production use.
ENGINEERING REFERENCE
Assembly And Interchangeability Notes
The SUN160 assembly and interface requirements below are customer-confirmed. The linked CAD files are same-type engineering references and are not presented as an as-built SUN160 drawing.
Confirmed Interface And Assembly Requirements
- G 3/4 inch male water inlet and M22 x 1.5 male high-pressure outlet with 14 mm bore.
- IEC B14 direct-coupled motor flange with 28 mm hollow direct-insertion shaft.
- Centre of gravity within 150 mm above the rear dual-wheel axle centreline.
- Vibration-foot mounting centre distance: 220 mm x 180 mm.
Customer-Provided Reference CAD
MATERIALS & MANUFACTURING
Pump And Chassis Materials
The supplied product record identifies the pump and chassis materials. The current product-page FAQ also states the manufacturer-reported process controls below; no surface-finish specification is asserted.
Material / Grade
Copper/ceramic pump and stainless chassis
Process Controls
Strict material selection, standardized production processes, full inspection before shipment and continuous performance testing; each unit is tested for pressure, safety and durability.
Surface Treatment
304 stainless chassis with 180-grit brushed finish; forged brass pump head with electroless nickel plating; industrial alumina ceramic plungers super-finished to Ra 0.2; exposed fasteners with Dacromet coating.
PERFORMANCE & WORKING CONDITIONS
Operating Window For Selection
Use pressure and flow together with power, water source, nozzle, distance and surface limits. The 3000 PSI search term is not treated as a SUN160 rating unless the same operating point is confirmed.
USE & SAFETY INSTRUCTIONS
Use And Safety For Setup
Follow the setup, operating, isolation and maintenance checks below and use the current configuration guidance for the ordered unit.
Before Installation
Check the SUN160 model, 220 V supply, water source and supplied accessories before setup.
- Verify the model and electrical supply
- Check hose, spray gun, lance, filter and foam bottle
- Inspect for transport damage or contamination
Connect And Prime
Connect the inlet water, high-pressure hose, spray gun and lance according to the ordered configuration. Establish water flow before starting the motor.
- Use the supplied filter and clean water source
- Check each connection for leakage
- Follow the current configuration manual for startup
Operate Within The Match
Confirm the pressure, flow, nozzle, distance and surface limits for the job. Test a low-risk area before cleaning a vehicle finish or other sensitive surface.
- Use a suitable nozzle and spray distance
- Do not aim the jet at people, animals or energized equipment
- Stop if abnormal vibration, leakage or pressure behavior appears
Depressurize And Store
Release the trigger, isolate power and water, relieve residual pressure, and drain or store the hose and accessories as instructed for the ordered configuration.
- Switch off and isolate before maintenance
- Inspect hose, gun, lance and fittings before the next use
- Keep the unit and accessories clean and protected from damage
PURCHASING CONDITIONS
Commercial Terms For The Quotation
No numeric or contractual term was supplied for this task, so the page directs buyers to confirm each commercial item for the ordered configuration.
- MOQConfirm MOQ with sales for the selected SUN160 configuration.
- Sample PolicyConfirm sample availability and whether a sample charge applies.
- Sample Lead TimeConfirm sample lead time with sales before order.
- Bulk Lead TimeConfirm production lead time after configuration and order approval.
- Price BasisConfirm quotation currency, Incoterm and configuration scope with sales.
- PackagingConfirm export packing and the accessory packing list for the ordered unit.
- Payment TermsConfirm payment terms in the quotation before order.
- Shipping SupportConfirm courier, air or sea shipping options for the destination.
PRE-SALES & AFTER-SALES SERVICE
Support From Review To Repeat Supply
Support language is limited to configuration review, order-document checks and technical/service contact; no response-time promise is published.
Before Ordering
Review the required pressure and flow, voltage, water source, nozzle and accessory set with sales before ordering.
During Production
Confirm the ordered SUN160 configuration, accessory list and shipping documents against the quotation.
After Delivery
Use the supplied operating guidance and contact the manufacturer for setup, service or replacement-part questions.
FACTORY & MANUFACTURER
Manufacturer And Factory Identity
The supplied task data identifies the legal manufacturer and factory address. Order-specific capability and documentation are reviewed during quotation.
Taizhou Zhuosen Machinery Co., Ltd.
Factory address: Xialiang Industry Part, Luqiao, Taizhou, Zhejiang, China. The current production capacity, inspection evidence and OEM/ODM scope are reviewed for the ordered configuration.
- Manufacturer identity supplied by customer
- Production and inspection scope confirmed for the order
- OEM / ODM terms confirmed by quotation where applicable
CERTIFICATES & STANDARDS
Confirmed Compliance Materials
The following certification and standards information is customer/manufacturer confirmed for the SUN160 record. Certificate expiry information is intentionally omitted from the public page.
- CELVD, EMC and Machinery requirements
- EACEurasian conformity certification
- CCCSingle-phase AC motor
- RoHSRestriction of hazardous substances
- ISO 9001:2015Manufacturer quality-management certification
REQUEST A TECHNICAL QUOTE
Tell Us The Equipment, Condition And Quantity
- +86 13968669135
- [email protected]
- WhatsApp: +86 13968669135
- Xialiang Industry Part, Luqiao, Taizhou, Zhejiang, China
