Wingspan Tech
PORTABLE 220 V COLD-WATER CLEANING
1400 psi pressure washer
Model: A-Series 1400 PSI
The A-Series 1400 PSI pressure washer combines adjustable cold-water output, a copper-and-ceramic pump, a four-stage electric motor and a stainless-steel chassis for vehicle washing and light property cleaning. Its 7.5 L/min working flow supports controlled rinsing without moving to a heavier commercial pressure class.
- Максимальное давление1400 PSI / 96.5 bar
- Working Flow7.5 L/min
- Electrical Supply220 V / 50 Hz / single phase
- Motor Input2.2 kW with overload protection
- Pump And FrameCopper/ceramic pump; stainless-steel chassis
- Cleaning ControlAdjustable pressure and four nozzles
A stable water supply and the correct nozzle keep pressure and flow inside the intended cleaning range.
SURFACE CONTROL
Nozzle Choice Determines How 1400 PSI Reaches The Surface
A 1400 PSI pressure washer can serve painted vehicles, outdoor furniture and sound masonry only when spray width, distance and dwell time match the surface.
The widest suitable fan nozzle and a longer starting distance reduce concentrated impact; narrower nozzles increase local cleaning force for durable surfaces.
Wide-Fan Nozzles Protect Finished Surfaces
Painted panels, coated metal and outdoor furniture benefit from a broad fan, continuous movement and a small-area test before full cleaning.
Narrower Jets Target Sound Hard Surfaces
Stable concrete and masonry can use a more concentrated pattern after cracks, loose joints and coatings are excluded from the work area.
SITE READINESS
220 V Power And 9 L/Min Water Supply Stabilize Output
The 2.2 kW single-phase motor and positive-displacement pump depend on a correctly rated electrical circuit and continuous clean-water feed.
A dedicated 220 V circuit and at least 9 L/min available inlet flow provide operating margin above the 7.5 L/min working flow.
DUTY CYCLE
Intermittent Cleaning Fits The 2.2 kW Portable Configuration
The compact 1400 PSI configuration is intended for vehicle bays, home-service work and light property cleaning rather than uninterrupted industrial washdown.
Cleaning periods of up to 30 minutes followed by a 10-minute cooling interval keep motor temperature and bypass heat under control during repeated jobs.
- Suitable Work PatternVehicle rinsing, patio cleaning and mobile jobs with natural setup and repositioning pauses.
- Operating ResultCooling intervals protect motor and pump temperature during repeated daily cycles.
- Upgrade TriggerContinuous production washdown or larger surface-cleaner attachments require a higher-duty pump and motor package.
- Selection ConsequenceMatching duty cycle avoids thermal trips and premature seal wear caused by extended bypass operation.
PRODUCT PHOTOS
A-Series Product And Pump Views
The gallery shows the portable chassis, pump assembly and accessible component layout used for daily setup and transport.
COMPLETE SPECIFICATIONS
A-Series 1400 PSI Ordering Specifications
The pressure class, electrical input, pump materials, dimensions and supplied cleaning controls define this portable configuration.
| Название продукта | A-Series 1400 PSI Electric Pressure Washer |
|---|---|
| Model / Part Number | A-Series 1400 PSI |
| Категория продукта | Portable electric cold-water pressure washer |
| Максимальное давление | 1400 PSI / 96.5 bar |
| Working Flow | 7.5 L/min |
| Motor Input | 2.2 kW |
| Electrical Supply | 220 V / 50 Hz / single phase |
| Pump And Chassis | Copper/ceramic pump; stainless-steel chassis |
| Machine Dimensions | 620 × 425 × 380 mm |
| Вес нетто | 35 кг |
| Cleaning Controls | Adjustable pressure; four interchangeable nozzles; trigger safety lock |
| Водоснабжение | Clean cold water; self-priming inlet with filter; at least 9 L/min available flow |
| Packaging Unit | 1 complete set per export carton |
APPLICATIONS
Cleaning Tasks Suited To The 1400 PSI Class
Adjustable pressure and four nozzle patterns cover routine rinsing and light residue removal on surfaces that do not require an industrial pressure class.
Vehicle Exterior Washing
Wide-fan rinsing supports passenger vehicles, motorcycles and fleet touch-up work while preserving distance from paint edges, seals and sensors.
Patios And Outdoor Furniture
Controlled cold-water cleaning removes loose soil from sound stone, metal and durable outdoor furniture after a small-area surface test.
Light Property Maintenance
The compact chassis and self-priming inlet suit periodic cleaning around workshops, storefronts and residential service areas with managed drainage.
MATERIALS & MANUFACTURING
Copper, Ceramic And Stainless-Steel Working Parts
The A-Series combines water-contact pump materials with a corrosion-resistant portable frame and accessible service points.
Copper-And-Ceramic Pump Assembly
A copper pump body and ceramic pumping elements provide wear resistance for repeated cold-water service.
Four-Stage Motor With Overload Protection
The 2.2 kW electric drive uses overload protection to interrupt operation when electrical or thermal limits are exceeded.
Stainless-Steel Portable Chassis
The compact stainless-steel frame supports corrosion resistance, transport and open access to the pump, motor and hose connections.
PERFORMANCE & WORKING CONDITIONS
1400 PSI Output With Controlled Cold-Water Flow
Pressure, flow, nozzle size and inlet conditions operate as one system; the maximum-pressure number does not describe cleaning speed by itself.
USE & SAFETY INSTRUCTIONS
Four Steps For Safe Startup, Cleaning And Storage
The operating sequence protects the water path, electrical connection, high-pressure hose and cleaned surface.
Inspect The Water And High-Pressure Paths
Check the inlet filter, hose, spray gun, lance, nozzle and quick connections before each use.
- Replace cut, bulged or leaking high-pressure hose
- Clean the inlet filter and nozzle opening
- Pull back every quick connection to verify lock engagement
Prime With The Motor Switched Off
Open the water supply and hold the trigger until the outlet flow is continuous and free of visible air.
- Maintain at least 9 L/min inlet flow
- Keep the electric plug and connection dry
- Never run the pump without water
Start Wide And Increase Cleaning Force Gradually
Begin with a wide-fan nozzle, longer distance and continuous movement on a small low-risk area.
- Keep the jet away from people, animals and energized equipment
- Avoid seals, loose coatings and damaged joints
- Stop after abnormal noise, vibration, leakage or repeated protection trips
Isolate, Depressurize And Drain After Use
Switch off power, close the water source and trigger the gun to release residual pressure before disconnection.
- Rinse the detergent path with clean water
- Drain hoses and protect the unit from freezing
- Store the nozzle set and gun free from impact and contamination
PURCHASING CONDITIONS
Standard Terms For An A-Series 1400 PSI Order
One complete set can be used for evaluation, while production orders follow the approved electrical, accessory and packing configuration.
- Minimum Order: 1 SetOne complete washer is available as a paid evaluation order.
- Evaluation Unit: 7–10 Business DaysThe unit follows the approved voltage, plug, nozzle and accessory list.
- Production Lead Time: 20–30 DaysTiming begins after configuration approval and deposit receipt.
- Price Basis: FOB NingboAlternative Incoterms can be listed for the destination and shipment size.
- Export Packing: 1 Set Per CartonThe washer, gun, lance, hose, nozzle set and filter are packed as one shipment unit.
- Payment: 30% DepositThe remaining 70% is due before shipment after production inspection.
- Shipping: Courier, Air Or SeaThe route depends on quantity, destination and required delivery time.
- Order RecordThe quotation identifies pressure class, voltage, plug, accessories, packing and Incoterm.
PRE-SALES & AFTER-SALES SERVICE
Configuration Review, Production Testing And 12-Month Support
Technical support follows the model record from the first application review through replacement-part matching.
Application And Utility Review Before Ordering
Surface type, cleaning frequency, water supply, voltage, plug and required hose reach are matched to the 1400 PSI configuration.
Pressure, Flow And Leakage Tests Before Shipment
Each production unit is checked with its nozzle and accessory path for stable output, motor operation, leakage and safety-control function.
12-Month Warranty And Replacement-Part Matching
The standard one-year warranty covers manufacturing defects, while hose, gun, nozzle, seals and pump-service parts are matched by model and serial record.
FACTORY & MANUFACTURER
Taizhou Zhuosen Builds Pumps And Complete Washers
Taizhou Zhuosen Machinery Co., Ltd. manufactures high-pressure pumps and complete cleaning machines in Luqiao, Taizhou, Zhejiang, China.
Taizhou Zhuosen Machinery Co., Ltd.
The factory reports annual capacity of 500,000 plunger pumps and 50,000 high-pressure washing machines. The A-Series uses in-house pump and washer assembly, pressure and leakage testing, serialized production records and export packing.
- High-pressure pump and complete-machine production
- Pressure, flow, leakage and electrical-safety checks
- Voltage, plug, hose and accessory configuration
- Export documentation and replacement-part support
REQUEST A TECHNICAL QUOTE
Send The Cleaning Task, Voltage And Order Quantity
- +86 13968669135
- [email protected]
- WhatsApp: +86 13968669135
- Xialiang Industry Part, Luqiao, Taizhou, Zhejiang, China
