Wingspan Tech
High Pressure Jetting Pump Affordable Factory Price
The High Pressure Jetting Pump provides an ultra-strong water jet pressure of up to 2800 bar and is designed for ship paint removal, industrial pipeline dredging and surface treatment. As a source manufacturer with a production base of 30,000 square meters, Winspan eliminate all middlemen trade links and provide you with highly competitive ex-factory prices, faster customization speed and perfect after-sales guarantee.
High pressure jetting pump for people
Ship maintenance and shipyard
mainly used for hull shell paint removal, marine biological cleaning and ballast tank inner wall rust removal, can adapt to the seaside high salt spray corrosion environment of long-term operation needs.
Municipal road and pipeline management
suitable for urban large sewer dredging, street stubborn oil cleaning and bridge structure cleaning, for the urban sanitation system to provide high efficiency, large flow of operational support.
Chemical and oil refining enterprises
it is used to regularly clean up the hard scale in the heat exchanger, reactor and all kinds of production line pipes to ensure the heat exchange efficiency and system operation safety of the production process of the chemical plant.
Construction contractor
suitable for large concrete surface chiseling, building template cleaning and exterior wall renovation, to meet the strict requirements of high-strength construction site for equipment durability and mobility.
high pressure jetting pump characteristics
Forged alloy steel pump head
high-strength forged alloy steel materials, corrosion resistance to improve 50%, in high-pressure environment can be continuous operation for two thousand hours without cracks, greatly reducing the later maintenance frequency.
High hardness ceramic plunger
The surface of the plunger is made of industrial-grade wear-resistant ceramic with a hardness of up to grade 9, which effectively reduces the heat generated by friction of the seal and extends the replacement cycle of wearing parts to more than 1,500 hours.
Forced cooling lubrication system
built-in circulating coolant channel to ensure that the temperature rise of the power end bearing does not exceed 35 degrees under full load conditions to prevent mechanical failure caused by overheating of lubricating oil.
Precision pressure regulating valve
equipped with zero pressure discharge safety valve, pressure regulation accuracy of 1%, can quickly switch the working state without pressure relief equipment, significantly improve the safety of high pressure operation.
Integrated compact structure
the pump body and the drive system are designed with an integrated steel base, which reduces the impact of operating vibration on the mechanical seal, and the equipment covers an area of 20% smaller than that of the traditional pump set.
Global standard certification guarantee
the product strictly passes the international quality system certification and safety certification, and passes the continuous overload test for 12 hours before leaving the factory to ensure the stability of each pump group under severe working conditions.
High Pressure Jetting Pump Structured Detailed Parameter Table
| Parameters | Technical Specifications |
| Product Category | Industrial reciprocating high pressure pump |
| Pressure range | 50 bar to 2800 bar |
| Flow range | 3 liters/minute to 1000 liters/minute |
| Pump head structure | Independent hydraulic end design |
| Transmission method | Coupling connection or gearbox drive |
| Water intake requirements | Industrial clean water or filtered reclaimed water |
| Cooling method | Forced water cooling or external heat dissipation system |
| Structural form | Skid-mounted, mobile trailer, or soundproof box type |
high pressure jetting pump contrast point
Through the modular design of the Winspan High Pressure Jetting Pump, the switching speed of the equipment under different pressure requirements is three times faster than that of conventional pumps. Our independent hydraulic end design allows maintenance personnel to replace the seal without disassembling the entire pump set. Compared with similar products, the high-precision crankshaft transmission system used in the Winspan pump group improves the mechanical transmission efficiency by 10%. This means that under the same power input, our equipment can produce a more stable beam of water, effectively reducing energy waste.
Solve the long downtime of equipment maintenance
in view of the inconvenience of industrial field maintenance, Winspan through the quick-change sealing structure, the daily seal replacement time is shortened to less than 30 minutes.
Solve the unstable operation in complex environment
the Winspan pump set is equipped with multi-stage heavy-duty filter and anti-seismic base, which solves the problem of damage caused by impurities entering the pump body in harsh environments such as ship repair or mining.
Solve the large fluctuation of output pressure
Through advanced multi-plunger phase compensation technology, we control the pressure fluctuation within 3%, and solve the problem of unstable pressure damaging the surface of the workpiece in precision cleaning tasks.
high pressure jetting pump instructions
Check before starting
check the lubricating oil level and water inlet filter screen to ensure that the water supply is sufficient and the water inlet pipeline is not bent, and connect the high-pressure hose and nozzle according to regulations.
Start-up and preheating
turn on the motor or diesel engine and keep it running for three minutes without load, judge whether the operation is stable by observing the pressure gauge, and then gradually boost the pressure after the pump body is preheated.
Pressure regulating operation
slowly rotate the pressure regulating valve to the pressure required by the process. During the operation, it is strictly prohibited to exceed the maximum rated pressure marked by the pump set to prevent the internal components from being damaged.
Shutdown maintenance
after the operation, the residual pressure in the pump must be removed before the power source is closed, and the residual water in the pump head and pipeline must be discharged to prevent the pump body from freezing and bursting due to low ambient temperature.
FAQ
CONTACT US
High Pressure Jetting Pump Affordable Factory Price
The High Pressure Jetting Pump provides an ultra-strong water jet pressure of up to 2800 bar and is designed for ship paint removal, industrial pipeline dredging and surface treatment. As a source manufacturer with a production base of 30,000 square meters, Winspan eliminate all middlemen trade links and provide you with highly competitive ex-factory prices, faster customization speed and perfect after-sales guarantee.
2800 bar
Maximum pressure
1000 liters per minute
Maximum flow rate
450 kW
Driving power
high pressure jetting pump characteristics
Forged alloy steel pump head
high-strength forged alloy steel materials, corrosion resistance to improve 50%, in high-pressure environment can be continuous operation for two thousand hours without cracks, greatly reducing the later maintenance frequency.
High hardness ceramic plunger
The surface of the plunger is made of industrial-grade wear-resistant ceramic with a hardness of up to grade 9, which effectively reduces the heat generated by friction of the seal and extends the replacement cycle of wearing parts to more than 1,500 hours.
Forced cooling lubrication system
built-in circulating coolant channel to ensure that the temperature rise of the power end bearing does not exceed 35 degrees under full load conditions to prevent mechanical failure caused by overheating of lubricating oil.
Precision pressure regulating valve
equipped with zero pressure discharge safety valve, pressure regulation accuracy of 1%, can quickly switch the working state without pressure relief equipment, significantly improve the safety of high pressure operation.
Integrated compact structure
the pump body and the drive system are designed with an integrated steel base, which reduces the impact of operating vibration on the mechanical seal, and the equipment covers an area of 20% smaller than that of the traditional pump set.
Global standard certification guarantee
the product strictly passes the international quality system certification and safety certification, and passes the continuous overload test for 12 hours before leaving the factory to ensure the stability of each pump group under severe working conditions.
High Pressure Jetting Pump Structured Detailed Parameter Table
| Parameters | Technical Specifications |
| Product Category | Industrial reciprocating high pressure pump |
| Pressure range | 50 bar to 2800 bar |
| Flow range | 3 liters/minute to 1000 liters/minute |
| Pump head structure | Independent hydraulic end design |
| Transmission method | Coupling connection or gearbox drive |
| Water intake requirements | Industrial clean water or filtered reclaimed water |
| Cooling method | Forced water cooling or external heat dissipation system |
| Structural form | Skid-mounted, mobile trailer, or soundproof box type |
high pressure jetting pump contrast point
Solve the long downtime of equipment maintenance
in view of the inconvenience of industrial field maintenance, Winspan through the quick-change sealing structure, the daily seal replacement time is shortened to less than 30 minutes.
Solve the unstable operation in complex environment
the Winspan pump set is equipped with multi-stage heavy-duty filter and anti-seismic base, which solves the problem of damage caused by impurities entering the pump body in harsh environments such as ship repair or mining.
Solve the large fluctuation of output pressure
Through advanced multi-plunger phase compensation technology, we control the pressure fluctuation within 3%, and solve the problem of unstable pressure damaging the surface of the workpiece in precision cleaning tasks.
High pressure jetting pump for people
Ship maintenance and shipyard
mainly used for hull shell paint removal, marine biological cleaning and ballast tank inner wall rust removal, can adapt to the seaside high salt spray corrosion environment of long-term operation needs.
Municipal road and pipeline management
suitable for urban large sewer dredging, street stubborn oil cleaning and bridge structure cleaning, for the urban sanitation system to provide high efficiency, large flow of operational support.
Chemical and oil refining enterprises
it is used to regularly clean up the hard scale in the heat exchanger, reactor and all kinds of production line pipes to ensure the heat exchange efficiency and system operation safety of the production process of the chemical plant.
Construction contractor
suitable for large concrete surface chiseling, building template cleaning and exterior wall renovation, to meet the strict requirements of high-strength construction site for equipment durability and mobility.
high pressure jetting pump instructions
Check before starting
check the lubricating oil level and water inlet filter screen to ensure that the water supply is sufficient and the water inlet pipeline is not bent, and connect the high-pressure hose and nozzle according to regulations.
Start-up and preheating
turn on the motor or diesel engine and keep it running for three minutes without load, judge whether the operation is stable by observing the pressure gauge, and then gradually boost the pressure after the pump body is preheated.
Pressure regulating operation
slowly rotate the pressure regulating valve to the pressure required by the process. During the operation, it is strictly prohibited to exceed the maximum rated pressure marked by the pump set to prevent the internal components from being damaged.
Shutdown maintenance
after the operation, the residual pressure in the pump must be removed before the power source is closed, and the residual water in the pump head and pipeline must be discharged to prevent the pump body from freezing and bursting due to low ambient temperature.