Wingspan Tech
High Pressure Cleaning Gun Ready to Ship
This high-pressure cleaning gun supports a maximum working pressure of 500 bar and a high flow rate of 80 liters per minute, and is specially designed for high-intensity industrial cleaning. As the source manufacturing plant for high-pressure cleaning equipment, Winspan skip the intermediate trader link and provide you with competitive ex-factory prices, flexible customization options and faster bulk delivery.
High pressure cleaning gun for people
commercial car cleaning chain store:
Suitable for large automatic car wash line and manual fine wash shop. High-frequency use of the water gun life requirements are extremely high, the wear-resistant valve core of this product can withstand hundreds of times a day to open and close the wash, reduce the cleaning station equipment maintenance downtime.
Municipal Sanitation and Floor Cleaning Contractors:
Applicable to streets, guardrails, garbage stations and other public facilities flushing operations. The high-pressure cleaning gun provides high-flow and high-pressure support, which can quickly strip stubborn sediment and oil, and improve the cleaning efficiency of the municipal sanitation team.
Industrial plant and equipment maintenance department:
It is suitable for cleaning plant floor, heavy machinery, reaction kettle and various industrial pipelines. The high-pressure injection force of 500 bar can remove industrial grease and chemical residues to ensure the clean and safe operation of production equipment.
Ship repair and port cleaning engineering provider:
It is suitable for marine removal, paint removal and rust removal of hull. The material design of the product is resistant to salt spray corrosion, so that it can adapt to the harsh marine operating environment and provide high-strength cleaning support for the daily maintenance of large ships.
high pressure cleaning gun characteristics
500 bar resistant ultra high pressure valve body:
Forged brass and stainless steel valve body is adopted, the maximum pressure resistance is 500 bar, the deformation rate is reduced by 90% under ultra-high pressure continuous operation, the risk of high pressure burst is effectively avoided, and the service life is prolonged by more than 2 years.
ceramic and stainless steel hard spool:
Valve core combined with hard stainless steel ball and high purity ceramic valve seat, wear resistance increased by 3 times, can effectively prevent high pressure water scour caused by internal micro leakage, significantly reduce the frequency of downtime maintenance.
low resistance and labor saving trigger design:
Optimize the lever transmission structure and reduce the pull force of the trigger by 40%, even in continuous hand-held operations for several hours, it can significantly reduce the fatigue of the operator’s hands.
150 degrees of high temperature heat resistant seals:
The internal use of imported fluorine rubber and Teflon sealing ring, can withstand up to 150 degrees Celsius hot water cleaning, in high temperature and high pressure alternating environment is not easy to aging and cracking.
360 degree anti winding water inlet connector:
The water inlet can be equipped with a stainless steel rotary joint, and the high-pressure hose can rotate freely when working, avoiding the hose to twist and curl, improving the flexibility of operation and reducing hose wear.
Enhanced Shatterproof High Density Enclosure:
The shell is wrapped in impact-resistant reinforced nylon material, which can withstand a drop of 2 meters without cracking. The internal insulation structure can prevent heat conduction and protect the safety of the operator.
High Pressure Cleaning Gun Detailed Technical Specifications
| Parameter Items | Specification parameters |
| Product Model | WS-G500-80 |
| Maximum working pressure | 500 Bar |
| Design maximum flow | 80 L/min |
| Continuous operating temperature | 150 °C |
| Valve body manufacturing material | Forged brass or 316 stainless steel are available. |
| Valve core and valve seat material | Tungsten carbide or ceramics with hardened stainless steel |
| Inlet connection method | 3/8 inch female thread or quick plug |
| Outlet connection method | 1/4-inch female thread or 11.7 mm quick coupling |
| Safety lock configuration | Equipped with a manual safety lock to prevent accidental operation |
| Gun body material | Reinforced abrasion-resistant polyamide nylon |
| Net weight of the whole gun | 1.15 kg |
high pressure cleaning gun contrast point
This high-pressure cleaning gun has been fully optimized in structural design and material wear resistance. Compared with similar conventional plastic valve body water guns, its core high-pressure channels are all designed to be thickened forged brass and 316 stainless steel, which can easily cope with high load and long-term uninterrupted industrial washing operations. In addition, the product introduces advanced low-resistance trigger technology and high-temperature-resistant sealing structure, which not only greatly reduces the labor intensity of operators, but also enables it to stably adapt to harsh cleaning environments such as alternating cold and hot water, bringing users a failure rate Lower cleaning experience.
high pressure valve core erosion wear leakage:
The Winspan high-pressure cleaning gun adopts hard ceramic valve seat and stainless steel ball valve, which solves the persistent problems in the industry that the traditional metal valve core is easy to wear under long-term high-speed water flow erosion, resulting in dripping of the spray gun and pressure relief of the system.
long working hand fatigue and tenosynovitis:
The Winspan optimizes the internal lever resistance of the trigger, and solves the problems of excessive holding force of ordinary high-pressure guns, finger soreness and muscle strain of operators in long-term continuous car washing or municipal cleaning operations.
Aging and deformation of seals under high temperature and high pressure:
The Winspan adopts heat-resistant fluorine rubber and stainless steel fastening sealing ring, which solves the fault that the ordinary rubber sealing ring is easy to harden and become brittle under hot water cleaning or frequent pressure fluctuation, resulting in frequent water leakage at the handle.
high pressure cleaning gun instructions
Pipe connection and locking
Align the high-pressure hose connector with the water inlet at the bottom of the high-pressure cleaning gun and tighten it with a wrench to prevent the high-pressure lower connector from loosening.
Select and install the nozzle
According to the specific cleaning requirements, insert the nozzle with the corresponding angle at the quick connector of the gun head, and confirm that the quick connector sleeve has been snapped back and locked.
Start-up exhaust and test spray
Connect the water source and the high-voltage main engine, unlock the safety lock before pulling the trigger, and pull the trigger towards the safe direction to discharge the air in the system.
Pressure relief locking after operation
After cleaning, close the high-pressure main engine and water source, pull the trigger to release the residual high pressure in the pipeline, and then pull the trigger safety lock back to the locked state.
FAQ
CONTACT US
High Pressure Cleaning Gun Ready to Ship
This high-pressure cleaning gun supports a maximum working pressure of 500 bar and a high flow rate of 80 liters per minute, and is specially designed for high-intensity industrial cleaning. As the source manufacturing plant for high-pressure cleaning equipment, Winspan skip the intermediate trader link and provide you with competitive ex-factory prices, flexible customization options and faster bulk delivery.
500 bar
Maximum pressure
80 liters per minute
Maximum flow rate
150 degrees Celsius
Maximum temperature
high pressure cleaning gun characteristics
500 bar resistant ultra high pressure valve body:
Forged brass and stainless steel valve body is adopted, the maximum pressure resistance is 500 bar, the deformation rate is reduced by 90% under ultra-high pressure continuous operation, the risk of high pressure burst is effectively avoided, and the service life is prolonged by more than 2 years.
ceramic and stainless steel hard spool:
Valve core combined with hard stainless steel ball and high purity ceramic valve seat, wear resistance increased by 3 times, can effectively prevent high pressure water scour caused by internal micro leakage, significantly reduce the frequency of downtime maintenance.
low resistance and labor saving trigger design:
Optimize the lever transmission structure and reduce the pull force of the trigger by 40%, even in continuous hand-held operations for several hours, it can significantly reduce the fatigue of the operator’s hands.
150 degrees of high temperature heat resistant seals:
The internal use of imported fluorine rubber and Teflon sealing ring, can withstand up to 150 degrees Celsius hot water cleaning, in high temperature and high pressure alternating environment is not easy to aging and cracking.
360 degree anti winding water inlet connector:
The water inlet can be equipped with a stainless steel rotary joint, and the high-pressure hose can rotate freely when working, avoiding the hose to twist and curl, improving the flexibility of operation and reducing hose wear.
Enhanced Shatterproof High Density Enclosure:
The shell is wrapped in impact-resistant reinforced nylon material, which can withstand a drop of 2 meters without cracking. The internal insulation structure can prevent heat conduction and protect the safety of the operator.
High Pressure Cleaning Gun Detailed Technical Specifications
| Parameter Items | Specification parameters |
| Product Model | WS-G500-80 |
| Maximum working pressure | 500 Bar |
| Design maximum flow | 80 L/min |
| Continuous operating temperature | 150 °C |
| Valve body manufacturing material | Forged brass or 316 stainless steel are available. |
| Valve core and valve seat material | Tungsten carbide or ceramics with hardened stainless steel |
| Inlet connection method | 3/8 inch female thread or quick plug |
| Outlet connection method | 1/4-inch female thread or 11.7 mm quick coupling |
| Safety lock configuration | Equipped with a manual safety lock to prevent accidental operation |
| Gun body material | Reinforced abrasion-resistant polyamide nylon |
| Net weight of the whole gun | 1.15 kg |
high pressure cleaning gun contrast point
high pressure valve core erosion wear leakage:
The Winspan high-pressure cleaning gun adopts hard ceramic valve seat and stainless steel ball valve, which solves the persistent problems in the industry that the traditional metal valve core is easy to wear under long-term high-speed water flow erosion, resulting in dripping of the spray gun and pressure relief of the system.
long working hand fatigue and tenosynovitis:
The Winspan optimizes the internal lever resistance of the trigger, and solves the problems of excessive holding force of ordinary high-pressure guns, finger soreness and muscle strain of operators in long-term continuous car washing or municipal cleaning operations.
Aging and deformation of seals under high temperature and high pressure:
The Winspan adopts heat-resistant fluorine rubber and stainless steel fastening sealing ring, which solves the fault that the ordinary rubber sealing ring is easy to harden and become brittle under hot water cleaning or frequent pressure fluctuation, resulting in frequent water leakage at the handle.
High pressure cleaning gun for people
commercial car cleaning chain store:
Suitable for large automatic car wash line and manual fine wash shop. High-frequency use of the water gun life requirements are extremely high, the wear-resistant valve core of this product can withstand hundreds of times a day to open and close the wash, reduce the cleaning station equipment maintenance downtime.
Municipal Sanitation and Floor Cleaning Contractors:
Applicable to streets, guardrails, garbage stations and other public facilities flushing operations. The high-pressure cleaning gun provides high-flow and high-pressure support, which can quickly strip stubborn sediment and oil, and improve the cleaning efficiency of the municipal sanitation team.
Industrial plant and equipment maintenance department:
It is suitable for cleaning plant floor, heavy machinery, reaction kettle and various industrial pipelines. The high-pressure injection force of 500 bar can remove industrial grease and chemical residues to ensure the clean and safe operation of production equipment.
Ship repair and port cleaning engineering provider:
It is suitable for marine removal, paint removal and rust removal of hull. The material design of the product is resistant to salt spray corrosion, so that it can adapt to the harsh marine operating environment and provide high-strength cleaning support for the daily maintenance of large ships.
high pressure cleaning gun instructions
Pipe connection and locking
Align the high-pressure hose connector with the water inlet at the bottom of the high-pressure cleaning gun and tighten it with a wrench to prevent the high-pressure lower connector from loosening.
Select and install the nozzle
According to the specific cleaning requirements, insert the nozzle with the corresponding angle at the quick connector of the gun head, and confirm that the quick connector sleeve has been snapped back and locked.
Start-up exhaust and test spray
Connect the water source and the high-voltage main engine, unlock the safety lock before pulling the trigger, and pull the trigger towards the safe direction to discharge the air in the system.
Pressure relief locking after operation
After cleaning, close the high-pressure main engine and water source, pull the trigger to release the residual high pressure in the pipeline, and then pull the trigger safety lock back to the locked state.