Wingspan Tech
Replacement Parts Pressure Washer
This replacement parts pressure washer page focuses on complete pump and motor-pump assemblies for commercial cleaning and industrial water-jetting. The six linked options span high-flow plunger pumps, integrated electric units and specialist ultra-high-pressure equipment, allowing buyers to identify the appropriate pump family before requesting a quote. A suitable assembly matches operating pressure, flow, motor supply, mounting and port geometry to the existing machine. Water supply and nozzle condition should be checked before a low-pressure pump is replaced.
Pressure Washer
Which Pressure Washer Pump Assembly Fits the Replacement Job?
A replacement search can point to a small repair part or to the complete pump assembly that restores the machine.
These six listed products are complete pumps or pump-motor units for commercial and industrial equipment; they are not a universal catalog of hoses, spray guns or nozzles.
The BML and AH families suit lower-pressure cleaning duties, while KT provides higher flow and VKH serves specialist ultra-high-pressure water-jetting. A complete assembly is the relevant purchase when the existing pump or drive unit must be replaced as a unit.
Pressure Washer Pump Flow and Drive Compatibility
A matching pressure number alone does not establish that a replacement pump will fit an existing machine.
A suitable replacement must match working pressure and flow at the same duty point, pump speed, motor voltage or mechanical drive, mounting pattern and inlet/outlet geometry.
The existing machine model, pump nameplate, mounting drawing and a photo of the ports provide the dimensions needed for a direct fit check. An electric unit also needs the site voltage, phase and frequency; a gearbox-driven pump needs the drive ratio and shaft arrangement.
When a Pressure Washer Needs a Pump Replacement
Low spray pressure can originate outside the pump, so the symptom alone does not identify the failed component.
Inlet flow, clogged filters, air leaks, worn nozzles and unloader operation should be checked before a complete pump replacement is selected.
If pressure and flow remain below the machine requirement after those external causes are corrected, inspect the pump valves, seals and drive. A worn service component may call for a repair kit; cracked housing or extensive internal damage makes a replacement assembly the clearer route.
Pressure Washer Pump Assemblies by Duty
These six linked products cover complete pump and motor-pump replacements for commercial cleaning and specialist water-jetting. Their rated pressure, flow, drive and materials differ, so the machine duty point must guide selection.
Bomba de émbolo buzo serie KT
High-flow municipal and industrial cleaning systems; the replacement drive and mounting should match the installed machine.
- Application / fitHigh-flow municipal and industrial cleaning systems
- Pressure / flow range100–200 bar; 70–142 L/min
- Material del cabezal de la bombaCast-iron pump head
- Drive / connectionModel-specific pump ports
22 kW Electric Pump-Motor Unit
Three-phase high-pressure cleaning systems; the replacement drive and mounting should match the installed machine.
- Application / fitThree-phase high-pressure cleaning systems
- Pressure / flow range350–500 bar; 22 L/min
- Material del cabezal de la bombaStainless-steel or brass pump head
- Drive / connection380–440 V, three-phase drive
BML Series Pump-Motor Unit
Fixed cleaning and water-treatment equipment; the replacement drive and mounting should match the installed machine.
- Application / fitFixed cleaning and water-treatment equipment
- Pressure / flow range100–250 bar; 12–19 L/min
- Material del cabezal de la bombaStainless-steel or brass pump head
- Drive / connection220 V or 380 V motor options
Pump-Motor Unit for Car Washing
Commercial vehicle-wash equipment; the replacement drive and mounting should match the installed machine.
- Application / fitCommercial vehicle-wash equipment
- Pressure / flow range100–250 bar; 12–19 L/min
- Material del cabezal de la bombaStainless-steel or brass pump head
- Drive / connection220 V or 380 V motor options
VKH Series Ultra-High-Pressure Pump
Industrial water-jetting and rust removal; the replacement drive and mounting should match the installed machine.
- Application / fitIndustrial water-jetting and rust removal
- Pressure / flow range1,000–2,500 bar; 5.6–36.5 L/min
- Material del cabezal de la bomba316L stainless-steel pump head
- Drive / connectionGearbox-driven installation
AH Series High-Pressure Pump
Cold-water industrial cleaning systems; the replacement drive and mounting should match the installed machine.
- Application / fitCold-water industrial cleaning systems
- Pressure / flow range200–300 bar; 14–15 L/min
- Material del cabezal de la bombaCopper/ceramic pump assembly
- Drive / connection3/4 in inlet; 3/8 in outlet
Pressure Washer Pump Order and Delivery Options
Availability, price, lead time and shipment terms depend on the selected pump model and drive configuration. A nameplate photo and operating duty point help define the unit for quotation.
Ask for availability and unit pricing after the replacement model, material and drive options are identified.
Request per-unit pricing for matching assemblies after a shared model specification is fixed.
Request a batch quotation and schedule against the confirmed model specification.
Lead time and dispatch timing are confirmed in the model-specific quotation.
Shipment method, destination and trade terms are agreed as part of the quotation.
Ask which commercial and model-specific documents can accompany the order.
Send a Pressure Washer Pump Drawing for Fit Review
Pressure Washer Pump Replacement Questions
These answers cover configuration, receiving checks, inquiry details, fluids and documents.
Can a replacement pump be supplied without a motor?
The listings include standalone pumps and integrated motor-pump units. Identify the configuration you need in your inquiry.
What should I check when a pump arrives?
The model and nameplate should match the order documents, packing should be inspected for transit damage, and the supplied commissioning guidance should be followed.
What information should accompany an inquiry?
An inquiry should include the old pump nameplate, machine model, duty point, motor supply, port sizes and required quantity.
Can the pump handle hot water or chemicals?
Fluid temperature and chemistry must match the selected head, seals and system specification.
Are manuals and product documents available?
The Download Center lists product catalogs; request a model-specific specification with a quote.
Request a Pressure Washer Pump Replacement Quote
- Phone: +86 13968669135
- Email: [email protected]
- WhatsApp: +86 13968669135
- Xialiang Industry Park, Luqiao, Taizhou, Zhejiang, China