Search the whole station
This best high-pressure cleaner is available in single-phase, three-phase, gasoline‑powered, and diesel‑powered models, supporting pressure adjustments from 50 to 2,800 bar. As a manufacturer with direct access to the production source, Winspan has eliminated all intermediate channels, offering large-scale customized manufacturing worldwide while ensuring highly competitive ex-factory prices and faster delivery times.
focus on the introduction of high-performance energy-efficient equipment. The dual security qualifications of the European Union and the Customs Union owned by the winspan can ensure smooth customs clearance in large quantities, and the ex-factory wholesale price and short payment period can meet the expectations of distributors for profit margins and capital turnover cycles.
engaged in high-strength surface cleaning such as painting and rust removal of the dock hull. The ultra-high pressure cold and hot water cleaning machine can directly peel off marine organisms and hard paint layers, and the stainless steel anti-fog corrosion frame can resist the harsh construction environment of high salt and high humidity in the ocean for a long time.
responsible for urban underground drainage network desilting, small advertising clean-up. The cleaning machine with diesel engine drive and large flow configuration can go deep into the outdoor power-free area, and the high-pressure water flow combined with the special gun head can instantly crush and wash away the stubborn grease and stones inside the pipeline.
need to purchase high-quality cleaning machine core skeleton and secondary assembly. The standardized symmetrical base and adjustable double output shaft structure enable it to flexibly match various brands of motors, water tanks and pneumatic control valve groups according to the needs of end customers.
as the best high pressure cleaner, this series provides single-phase, three-phase electric drive and gasoline and diesel engine drive, which can output 50 to 2800 bar working pressure and flexibly meet indoor and outdoor non-electric working conditions.
equipped with high-efficiency diesel heating boiler, cold water can be continuously heated to 90 degrees Celsius in 30 seconds, the cleaning efficiency of heavy oil and grease scale is more than 3 times higher than that of cold water.
high-purity ceramic plunger is used inside the pump body with imported V-shaped water seal, the wear resistance of the sealed chamber is increased by 70%, and it can work continuously for 1800 hours under heavy load operation without replacing the seal.
the whole machine is equipped with a high-strength thickened steel base and shock-absorbing foot pads, the vibration amplitude of the whole machine is controlled within 10 microns, and the noise is less than 80 decibels, which greatly reduces the hidden danger of loosening of joints due to high-frequency resonance.
The whole machine passes a 2-hour high-pressure leak test before leaving the factory, and obtains the dual certification of EU and Customs Union security, providing solid technical qualification support for distributors overseas customs clearance and local compliance sales.
the outer frame adopts a 316 stainless steel protective cover with a pipe diameter of 32mm, which is not only anti-collision and anti-fall, but also prolongs its service life by 1.5 times in high salt spray corrosive environments such as the ocean, and is more convenient for on-site hoisting and long-distance forklift loading and unloading.
| Product Model | Work pressure | Rated flow rate | Heating configuration | driving method | Outlet diameter | Net weight of the whole machine |
| WS-1509E | 150 bar | 9 liters per minute | Cold water only | 220V single-phase electric drive | External thread M22x1.5 | 35 kg |
| WS-2815E | 280 bar | 15 liters per minute | Cold water only | 380V three-phase electric drive | External thread M22x1.5 | 65 kg |
| WS-5030D | 500 bar | 30 liters per minute | Diesel heating | Diesel engine drive | quick-connect high-voltage connector | 220 kg |
| WS-10045P | 1000 bar | 45 liters per minute | Cold water only | Gasoline engine driven | quick-connect high-voltage connector | 310 kg |
| WS-28003E | 2800 bar | 3 liters per minute | Cold water only | 380V three-phase electric drive | Special high-pressure threaded joint | 420 kg |
Many high-pressure cleaners on the market are prone to high water temperature and cavitation of the pump body under continuous heavy load operation, which limits the continuous high-intensity operation of the equipment. The winspan best high pressure cleaner adopts a unique heat balance circuit and a high wear-resistant stainless steel valve body. Its self-balancing cooling channel can always control the temperature of the pump room within 55 degrees Celsius. This allows the equipment to be operated continuously for many days during high-pressure stripping of heavy ships or industrial pipelines, greatly avoiding the risk of forced shutdown due to overheating of the pump head. In addition, the frame and structure design of ordinary cleaning machines are often unable to take into account a variety of power modes, which brings heavy assembly and wiring problems to integrators. The winspan-made best high pressure cleaner uses a standardized chassis and modular body design, allowing distributors to freely switch electric motors, gasoline engines or diesel engine power systems on the same rack platform. This highly compatible chassis design eliminates the hidden dangers of secondary development and repeated modification by distributors, and reduces the overall research and development and assembly man-hours by 35%.
ordinary cleaning machines are prone to customer complaints due to plunger cracking. The winspan uses 99.5% purity ceramic plunger and mirror polishing process to increase the wear resistance of accessories by 70% and reduce the after-sales repair rate of distributors to less than 0.5%.
the equipment cannot be started due to the lack of high-power three-phase electricity in engineering cleaning. The series provides independent diesel or gasoline engine power configuration, without the need to connect to the grid, can provide continuous and stable high-voltage output.
simple cold water washing heavy oil is inefficient. The winspan is equipped with a diesel active heating boiler system, which can spray 90 degrees Celsius high-pressure hot water within 30 seconds, quickly emulsify grease, and increase work efficiency by 3 times.
before starting, confirm that the specified grade of lubricating oil is filled in the pump body, the liquid level must reach the middle line of the oil window, and the oil must be completely replaced once after 50 hours of first operation.
the water inlet must be equipped with a precision filter screen with a filtering accuracy higher than 50 microns, and the water supply must be kept at least 1.5 times of the rated flow rate to avoid overheating damage caused by dry rotation.
open the hand-held gun valve before starting the power, let the low-pressure water flow circulate for 1 minute, drain the excess air in the pump chamber and hose, then close the gun valve and tighten the pressure regulating valve gradually.
Before long-distance transportation or winter storage, the drain valve must be opened to drain all the water in the pump, and a small amount of harmless antifreeze must be introduced to prevent the shell and internal fine valve seat from freezing and cracking.
This best high-pressure cleaner is available in single-phase, three-phase, gasoline‑powered, and diesel‑powered models, supporting pressure adjustments from 50 to 2,800 bar. As a manufacturer with direct access to the production source, Winspan has eliminated all intermediate channels, offering large-scale customized manufacturing worldwide while ensuring highly competitive ex-factory prices and faster delivery times.
50 to 2,800 bar
Working pressure
3 to 1,000 liters per minute
Water flow rate
1.5 to 315 kW
Motor power
as the best high pressure cleaner, this series provides single-phase, three-phase electric drive and gasoline and diesel engine drive, which can output 50 to 2800 bar working pressure and flexibly meet indoor and outdoor non-electric working conditions.
equipped with high-efficiency diesel heating boiler, cold water can be continuously heated to 90 degrees Celsius in 30 seconds, the cleaning efficiency of heavy oil and grease scale is more than 3 times higher than that of cold water.
high-purity ceramic plunger is used inside the pump body with imported V-shaped water seal, the wear resistance of the sealed chamber is increased by 70%, and it can work continuously for 1800 hours under heavy load operation without replacing the seal.
the whole machine is equipped with a high-strength thickened steel base and shock-absorbing foot pads, the vibration amplitude of the whole machine is controlled within 10 microns, and the noise is less than 80 decibels, which greatly reduces the hidden danger of loosening of joints due to high-frequency resonance.
The whole machine passes a 2-hour high-pressure leak test before leaving the factory, and obtains the dual certification of EU and Customs Union security, providing solid technical qualification support for distributors overseas customs clearance and local compliance sales.
the outer frame adopts a 316 stainless steel protective cover with a pipe diameter of 32mm, which is not only anti-collision and anti-fall, but also prolongs its service life by 1.5 times in high salt spray corrosive environments such as the ocean, and is more convenient for on-site hoisting and long-distance forklift loading and unloading.
| Product Model | Work pressure | Rated flow rate | Heating configuration | driving method | Outlet diameter | Net weight of the whole machine |
| WS-1509E | 150 bar | 9 liters per minute | Cold water only | 220V single-phase electric drive | External thread M22x1.5 | 35 kg |
| WS-2815E | 280 bar | 15 liters per minute | Cold water only | 380V three-phase electric drive | External thread M22x1.5 | 65 kg |
| WS-5030D | 500 bar | 30 liters per minute | Diesel heating | Diesel engine drive | quick-connect high-voltage connector | 220 kg |
| WS-10045P | 1000 bar | 45 liters per minute | Cold water only | Gasoline engine driven | quick-connect high-voltage connector | 310 kg |
| WS-28003E | 2800 bar | 3 liters per minute | Cold water only | 380V three-phase electric drive | Special high-pressure threaded joint | 420 kg |
ordinary cleaning machines are prone to customer complaints due to plunger cracking. The winspan uses 99.5% purity ceramic plunger and mirror polishing process to increase the wear resistance of accessories by 70% and reduce the after-sales repair rate of distributors to less than 0.5%.
the equipment cannot be started due to the lack of high-power three-phase electricity in engineering cleaning. The series provides independent diesel or gasoline engine power configuration, without the need to connect to the grid, can provide continuous and stable high-voltage output.
simple cold water washing heavy oil is inefficient. The winspan is equipped with a diesel active heating boiler system, which can spray 90 degrees Celsius high-pressure hot water within 30 seconds, quickly emulsify grease, and increase work efficiency by 3 times.
focus on the introduction of high-performance energy-efficient equipment. The dual security qualifications of the European Union and the Customs Union owned by the winspan can ensure smooth customs clearance in large quantities, and the ex-factory wholesale price and short payment period can meet the expectations of distributors for profit margins and capital turnover cycles.
engaged in high-strength surface cleaning such as painting and rust removal of the dock hull. The ultra-high pressure cold and hot water cleaning machine can directly peel off marine organisms and hard paint layers, and the stainless steel anti-fog corrosion frame can resist the harsh construction environment of high salt and high humidity in the ocean for a long time.
responsible for urban underground drainage network desilting, small advertising clean-up. The cleaning machine with diesel engine drive and large flow configuration can go deep into the outdoor power-free area, and the high-pressure water flow combined with the special gun head can instantly crush and wash away the stubborn grease and stones inside the pipeline.
need to purchase high-quality cleaning machine core skeleton and secondary assembly. The standardized symmetrical base and adjustable double output shaft structure enable it to flexibly match various brands of motors, water tanks and pneumatic control valve groups according to the needs of end customers.
before starting, confirm that the specified grade of lubricating oil is filled in the pump body, the liquid level must reach the middle line of the oil window, and the oil must be completely replaced once after 50 hours of first operation.
the water inlet must be equipped with a precision filter screen with a filtering accuracy higher than 50 microns, and the water supply must be kept at least 1.5 times of the rated flow rate to avoid overheating damage caused by dry rotation.
open the hand-held gun valve before starting the power, let the low-pressure water flow circulate for 1 minute, drain the excess air in the pump chamber and hose, then close the gun valve and tighten the pressure regulating valve gradually.
Before long-distance transportation or winter storage, the drain valve must be opened to drain all the water in the pump, and a small amount of harmless antifreeze must be introduced to prevent the shell and internal fine valve seat from freezing and cracking.
Wingspan Tech
